WAY TO GO!
WAY TO GO FOLKS! We need to see more of this. Very impressive! BE HEARD!!
Thanks for the heads up on this Edward Wolff!
This video was started about four minutes in to the opposition comments. So it represents about 70% of the opposition voiced.
This is a video of the opposition to Senate Bill 140, sponsored by State Senator Leno, at the California State Capitol on 4-8-2015.
The room was packed and many Vapers and Vendors were pushed off into overflow rooms. It was scheduled for 1:30, but Vapers had to wait until 6 pm before they could be say only their name and their stance on the Bill. Many Vapers had to leave before they were allowed to speak in opposition.
.
It was clear on the faces of the politicians that this showing by Vapers made a large impact to them. It would be fair to say that they were Stunned.Huge shout out to SFATA-CA and Stefan Didak who were on the preset panel.
The Video:
THE GOBLIN RTA BY YOUDE
A PBusardo Review – The Youde Goblin
In this video we take a look at the Youde Goblin including a full build.
The Links:
The Goblin @ Eciggity
Dead Throne E-Liquid
Trevor Jones’ YouTube Channel
The Video:
The Photos:
NEW IN THE QUEUE – 4/6/15 – THE YIHI SX-MINI M-CLASS
Take a first look at the Yihi SX-Mini M-Class. This has the same 60 watts as the original SX-Mini, but now offers temp control.
Temp control works much like the DNA-40 by setting a temp limit. But unlike the DNA-40, you manually put the SX-Mini into temp control (Power&&Joule Menu setting set to Joule), you manually synch and lock in the resistance of your attached atty by pressing and holding the up and down button until your resistance is displayed (once again both the device and the attached atty need to be at matching room temperatures), and then you adjust via Joules not Watts. Is this Yihi trying to be different? Trying to be better? Trying to confuse us? Or trying to avoid patent infringement. Hmmm…
It appears that they addressed all my ergonomic issues including a fire button with more rounded sides and a outer shell that does cut into the hand as much due to a slight bevel. It really does feel better in the hand.
I do like outer casing finish of the original more though.
Don’t expect a review on this right away, but know that testing has begun.
In the photos below, the new M-Class is the one to the left. The original is shown to the right for comparison.
THE CARBON-40 FROM MADVAPES
For a long time I’ve called Madvapes the “Radio Shack of Vaping”, as they have all the connectors, switches, boxes, and kits I’ve used to create things like the “Atari Mod” and the “Dueling Juice Mod”, not to mention tons of other vaping supplies and gear.
What I’ve never considered Madvapes to be was a “Mod Maker”. This is about to change. Some of you already know about the Deviate that’s coming from them in the future, but here is another one coming from them. This one is called the Carbon-40…
Mod Specs:
– Made with real carbon fiber (very strong and lightweight)
– Top and bottom caps made of real wood
– Laser etched bottom with serial number
– Single removeable 18650 battery, but also contains a micro usb charger
– Powder coated trim
– Dimensions (4.25″ x 2.2″ x 1.1″)
– Dome style stainless steel switch
Release Date: April 15, 2015
Exclusively available from Madvapes
NEW IN THE QUEUE – 4/2/15 – THE INNOKIN ISUB TANK
INNOKIN ISUB TANK
Here’s a first look at the Innokin iSub Tank. This one comes with two .5 ohm heads…
- 100% Stainless Construction
- German made PC tank section
- Japanese organic cotton wick
- 4ml capacity
- Fully adjustable airflow
- No-spill coil swap system
THE SIGELEI MINI 30W AND CONTEST WINNERS!
FOR MY FRIENDS IN THE UK
Vapers In Power needs your help to field candidates at the 2015 UK General Election. Pressure groups, trade organizations, lobbyists – all can be ignored but political candidates get airtime and are allowed to get their message across. We will not be the David that slays Goliath but with your support we WILL be the vipers that bite the political Goliaths at every opportunity. The very people who should look after us are killing us with lies, half truths and feigned ignorance. We will bear the slings and arrows and BE HEARD!
Click the image below to be taken to the website:
NEW IN THE QUEUE – 3/30/15 – THE SPHEROID V3 & THE PICCOLO V4
THE SPHEROID V3 & THE PICCOLO V4
This is a sexy little Greek piece (no, I’m not talking about Dimitris)… from VapourArt comes the Spheroid V3 and the Piccolo V4.
The Spheroid V3 is an RTA that uses a filler material which is soaked with e-liquid and feeds the coil’s wick from above.
The Piccolo V3 is a 14500 mechanical.
NEW IN THE QUEUE – 3/30/15 – THE ELEAF LEMO 2
Here’s a first look at the Eleaf Lemo 2. I’ve been told this is a pre-market version and I’ll receive a market version soon. Good thing too because I had to literally destroy it to get the chimney unscrewed from the build deck. The screw in the final picture wasn’t me… I swear!! 🙂
Let’s hope the final market version leaves me in a better mood.
From Eleaf…
The Lemo 2 is the advance version of the well-known Lemo series atomizers due to its new innovative design of a side e-liquid fill hole and the use of PEEK(the well-known high heat and corrosion resistance material) of insulating piece. Vaping becomes safer and more stable, and no more needs of detaching the atomizer during refilling. The fill process becomes easier and leakage can be avoided. The inheritance of RBA head also maximizes the fun of DIY experience and could bring cloud vapor production for you.
Parameter:
Length: 76.2mm
Diameter: 22mm
Liquid Capacity: 3.8ml
Rated Resistance Range: ≥0.3Ω(Default configurations: )
Resistance of the Pre-made Coil: 0.5Ω
Diameter of the coil: 0.5mm
NEW IN THE QUEUE – 3/30/15 – THE DOVPO DT-50
…And you thought the MVP 3.0 was big?
This is a 50 watt box mod (VW only) from DOVPO, the same folks who brought you the E-LVT. It features a built in 4000 mAh lithium battery and will fire down to a .2 Ohm load. Sounds like it retains your setting based on your attached resistance. I’ll know more when I get to the review.
- OLED display screen
- Output Power:5-50W
- Intelligent memory:retain memories of the last resistance adjustment of power parameters, recycle use the same power will automatic matching
- Minimum resistance 0.2Ω
- Short circuit protection
- Low-voltage automatic protection:voltage lower than 2.5V
- Automatic Temperature protection:temperature over 70℃(158℉)
- Lithium battery automatic protection:battery won’t discharge over 25A
- Automatic fuse protection:voltage more than 30A
- Charging voltage:Micro charger DC5V
- Max current charging: 800mA
- Built-in lithium battery capacity: 4000Mah
- The top plate of the mod has an adjustable 510 firing pin and is also grooved in the fashion of crosshairs around the 510 connection for additional airflow.
- The OLED screen displays battery state, watts, voltage and ohms. You cannot vape and charge this device at the same time.
Store
