THE HCIGAR VT200 FIRST LOOK…
The Hcigar VT200 came in today. As I mentioned before, this will be part of the DNA-200 review video and device comparison.
The Hcigar website was down at the time of this post, but expect to pay around $170 for this piece.
No magnetic door on this one, but replacing the battery is going to be easier than with the Shark. This one has the balance plug plugged into the body and the mains are connected via an easy to get at XT30 connector.
This one feels solid if not a little hefty. The stripes down the side could be done a little better and feel sharp in the hand. The Shark has the size advantage coming in the smallest of the three.
The buttons feel good on the VT200, but don’t give you as much feedback nor feel as positive as with the Shark. If I were to rate button feel it would be…
- Vapor Shark DNA-200
- VT200
- Opus 200
If I were to rate batteries:
- VT200 – 1300 mAh battery, user serviceable, mains connected via XT30 connector
- Opus 200 – 1000 mAh battery, mains hard wired (even with the additional 100 mAh of the Opus over the Shark, the hard wiring of the mains may bump this rating down for you)
- Shark DNA-200 – 900 mAh battery, user serviceable, mains connected via banana plugs under heat shrink tubing
Some photos of the device itself, the battery compartment, and comparison photos for you…
INNOKIN GETS READY TO LAUNCH ANOTHER SUB-OHM TANK
Here comes another sub-ohm styled tank from Innokin… the iSub Apex. They’re talking a lot about “flavor” in this one. We’ll see.
Looks and feature wise I think they have their own iSub beat. Not too sure about the limited capacity though for sub-ohm vaping. Only 3ml.
From Innokin:
- PRISM Flavor+ Boost
- Quick & Clean Top-Fill
- Dual Adjustable Airflow
- Removable Drip Tip
- 100%Stainless Steel
- Pyrex Glass Tank
- iSub Coil Compatible
- Japanese Organic Cotton
- No Spill Coil Swap System
- 3ml Capacity
- MSRP will be $39.99
- Available for order on September 15th
- A rebuildable deck will be available as well
The iSub APEX has been created with expertise and passion to enhance your personal vaping experience; perfect for mouth to lung vaping for consistent full flavors, deep hits for huge clouds, or a great mix of both.
The Solid Spin Top Fill System refills quickly and cleanly and the raised adjustable airflow minimizes leaking and maximizes performance. Compact and quiet, the sleek high quality 100% Stainless Steel body and Pyrex Glass tank have been engineered for durability as well as outstanding flavor and cloud production. The iSub Apex is compatible with all 2.0Ω, 0.5Ω and 0.2Ω iSub Coils which are made with high quality 100% Japanese organic cotton for fast wicking and pure flavors.
Innokin’s advanced new design, Prism Flavor+, boosts flavors to bring out the best in your favorite eliquids. The patented Prism convection airflow system draws in air through the dual, raised, adjustable intakes, down into the heated outer chamber and then back up through the vaporizer coils, delivering maximum flavor and also minimizing leakage. The interior design of the iSub-Apex Prism system further focuses and enhances your eliquid vapor, delivering an exceptional burst of flavor with every vape.
Here’s an interesting blurb from them as well…
We do not currently offer iSub coils in nickel – we are waiting on more research. The new Innokin ATC Temperature control will be available soon which can also use Kanthal.
GOOD!! Looking forward to seeing that research!! Maybe we can get some questions answered.
Some first look photos:
A SHOW AND TELL WITH THE VAPORSHARK & A LOOK AT THE S-BODY S-CA3
A PBusardo Review – The VaporShark Vapor Flask Show And Tell and The S-Body S-CA3 Review
In this video we do a quick show and tell on the Vapor Flask by VaporShark. We then take a full look at the S-Body S-CA3 Squonk Box. We clarify contest entry rules, and finally find out who won the last contest.
The Links:
VaporShark
S-Body
AngelCigs
The Video:
The Photos:
THE VAPORSHARK DNA-200 – FIRST LOOK
The VaporShark DNA-200 came in today. As I mentioned before, this will be part of the DNA-200 review video and device comparison.
It’s now available on the VaporShark website for $199.99
It’s smaller than I expected, not much larger than the rDNA-40. It has the rubberized finish which feels great in the hand and leads to a nice firm grip.
A magnetic battery door open to a “user serviceable” battery, but it’s not going to be quite as easy as swapping out an 18650.
The balance connector is plug in, as are the mains, albeit under some heat wrap. Getting the wires back in and making the battery door sit firmly again is a challenge. I know, I lived it. Also, be gentle as leads could easily break… unfortunately, I know this first hand as well… see photos.
If you don’t need to take that battery out… don’t do it!! I’m not convinced this is a task for everyone.
A device like this with a battery like this would benefit from the Innokin Distrupter battery design. I’m sure someone will figure that out eventually.
Some photos for you. A rDNA-40 is shown for a size comparison.
THANK YOU AND WELL DONE!
A really cool “painting” done by Kim (Jimmith)!
Kim’s site is: www.jimmith.com and his Instagram is HERE.
Very cool! Thank you!
WHERE’S THE DNA-200 REVIEW?
I’m getting enough of questions about this that I thought it time for a public post.
It’s coming! 🙂
This may be my first 3-parter! I need some additional time with board, the software, and the devices.
In the video, in addition to looking at the software and board features, I also hope to do a comparison of some of the DNA-200 offerings that will be out already or coming your way. I thought this may also be helpful to you.
At least 3 (or all if they come in on time) of the following:
- The Opus 200 (already in-hand)
- The VaporShark DNA-200 (on it’s way)
- The Hcigar VT200 (on it’s way)
- The Volcano Lavabox 200 (status unknown)
Regardless, get some popcorn and a beer ready, this is going to be a long one.
My current plans are to look at the S-Body S-CA3 Squonk Box (getting a lot of questions about this one) followed by the iJoye Asolo 200, then to bury my head in the sand while I’m putting together the DNA-200 and device comparison video. This, of course, is subject to change.
A NEW PAGE… “MY TOP NOW!”
Welcome to the new “MY TOP NOW!” page. This will be easier for me to update over the Hardware Recommendations, which is more of a beginner’s page.
This page is dedicated to some of my current top pics in different categories and will change often as I discover and review new products.
Consider this a “money is no object” page and price is not a factor when considering products for this page.
- Are all categories covered? No.
- Could there be newer/better? Yes… but these are items that I have reviewed or used personally. I get to items when I can and it’s nearly impossible to look at everything these days.
- Will you agree with all of the choices seen here? Maybe, maybe not, but that’s why the page is called MY Top Now. 🙂
Got an idea for this page? I’ll listen. I may not change, but I will listen. 🙂
The videos contained here are either the review video for the product, or a video that the product appears in.
Check it out over in the left sidebar under “Additional” or right HERE!
SOME SHOW AND TELL, A LOOK AT THE GOLIATH V2, AND A NEW CONTEST
We kick off this video mentioning the upcoming Vape In The Fort 2.0 event I’ll be attending this weekend. We then do some show and tell on:
- That Snickers liquid I told you about from Eco-Vape
- Juice Ragz
- Some vape cases by John D AKA Coffeebum on ECF
- Some new product from Coil Master
We then take a look at the Goliath V2, a single or dual coil RTA that doesn’t need offset coils, and we wrap it all up with a contest for a rather nice prize pack.
The Links:
Eco-Vape
Juice Ragz
Coil Master
Eciggity
Youde
Freemax
Horizon
Anyvape
SmokeMe
S-Body
More info on the cases:
Vape Cases: jdwaldron2008@gmail.com, AKA coffeebum on ECF
Shipping is $6.00 in the US and other countries have been running $14.00 to $25.00 depending on method.
Felt lining is + $7.00 and custom patterns + $3.00 to + $5.00Currently supported mods and prices:
Billet Box $40.00
Hanna Modz V3 DNA40 pack $40.00
Innokin iTaste MVP 2.0 $40.00
Innokin Coolfire IV $40.00
iStick 30w $30.00 (clip only)
iStick 50W $40.00
Joyetech eVic VT $40.00 (no sleeve)
Joyetech eVic VT $40.00 (with sleeve)
Kanger SUBOX Mini $40.00
Praxis belt case $40.00 (also other 22/23mm tube mods)
REO Grand $40.00
Sigelei 100watt/150watt including Plus versions $40.00 (no sleeve)
Sigelei 50W VR2 $40.00 (no sleeve)
Sigelei Mini 30 $40.00 (no sleeve)
Tmod “Boy” mech $40.00
Tmod “Girl” mech $40.00
Tmod “Tranny” mech (also “Pregger” model) $40.00
Vapor Shark rDNA 40 with Shark Skin $40.00
Vapor Shark rDNA 40 without sleeve $40.00
Vapor Shark DNA 30 with Shark Skin $40.00
Vapor Flask DNA 40 $40.00
The Video:
THANK YOU EVERYONE…
My wife Tricia and I would like to sincerely thank everyone for the kind words over the loss of our Punkin. It really does mean a lot to us. Thank you everyone.
CRAFT CAST EPISODE 23
I spent an evening with Josh from Craft Vapery on their Craft Cast.
Dimitris, please don’t be jealous.
In this episode of the CRAFT CAST, Josh is joined via Skype by the one and only Phil Busardo from TasteYourJuice.com. Phil is one of the best known voices in the vaping community and is well known for his in-depth reviews of mainstream vaping hardware and liquids.
Phil discusses how he got his start in the industry and what prompted him to start reviewing juices and hardware. The two discuss Phil’s current top picks for mods and tanks, cloning, and the Chinese influence on the current market. Phil goes on to discuss his relationship with Dimitri (The Vaping Greek), regulations pending for the industry here in the US, Diketones, and the lack of real research about the health impacts of vaping. Along the way, Josh gets Phil’s opinions on the flavor profiles for CRAFT’s new line of Certifiably Vapable Liquids, followed by Phil’s take on where the industry is headed and what needs to change to make the future a reality.
Giveaway: Three winners will be chosen to receive a mod-and-tank-combo package generously donated by Phil and CRAFT VAPERY. Make sure to watch or listen to the episode for details on how to enter and win. One lucky listener will also win a free three-bottle box from CRAFT VAPERY! Make sure to comment on this post to be eligible to win.
Watch the episode here or feel free to subscribe to them:
Watch on YouTube: https://youtu.be/nlgQ0WDnSxY
Subscribe on iTunes: https://itunes.apple.com/us/podcast/craft-cast/id968987008?mt=2
Listen on ShoutEngine: http://shoutengine.com/CraftCast/
Store
