Category: Recent News
NEW IN THE QUEUE – THE VAPORSHARK VAPOR FLASK 133 – 9/16/16
This item has been received in exchange for promotion and/or review.
THE VAPORSHARK VAPOR FLASK 133
Here’s another new one from Vapor Shark. It’s their version of the Flask, so it’s not a Vape Forward product.
This one utilizes the DNA-200 board. You’re not going to get the full 200W capability of the DNA-200 as that would require a 3S lipo or 3-18650 batteries as seen in the Reuleaux. Since this Flask uses 2-18650 batteries, the board will self limit down to 133 watts. You can still take advantage of all the goodies Evolv’s EScribe has to offer.
Some other differences I’ve noticed between this, the original Flask and the VaporShark Flask, are the location and orientation of the control buttons which are now side-by-side on the side of the device, and a new magnetic battery cover which replaces the two bottom battery caps and makes switching out your batteries easier and quicker.
You also have the ability to customize this one at the time of purchase courtesy of ModFusion, VaporShark’s new printing service. You can select pre-done designs or upload your own. They were kind enough to put the B logo on mine which I’m really digging! Thanks for that!
Here’s some additional information from VaporShark:
The Vapor Flask 133 by Vapor Shark brings you all the technology and performance you have come to love from the DNA 200. This Dual Series 18650 device limits the DNA 200 Chipset to 133 watts. Although the batteries are user accessible and serviceable by removing the magnetic battery door, the Vapor Flask 133 by Vapor Shark is also equipped with Zip High Speed Charging. This means that you can charge the batteries from flat to full in about 90 minutes. 7 of the 8 user profiles have already been set up for you. Choose between Kanthal, Ni200, SS316L, Titanium and Sweet Spot Ti. By measuring the internal resistance and thermal characteristics of the casing, the Vapor Shark Diagnostics Team has ensured that you will have the most accurate vaping experience when using all coil types. As always, Vapor Shark’s signature backlit fire button has been incorporated into Evolv’s manufacturing process. This gives you the amazing tactile feedback that can only be found in Vapor Shark’s line of products. With its ergonomic design, 133 watts of power, and sleek matte finish, the Vapor Flask 133 by Vapor Shark is sure to be a crowd pleaser.
Please Note: Batteries must be married. They should be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
NEW IN THE QUEUE – THE VAPORSHARK SWITCHBOX – 9/16/16
This item was received in exchange for promotion and/or review.
Really digging this piece and it’s nice to have a new Shark in my hands.
The SwitchBox is going to start shipping early October and is now available for pre-order on the VaporShark website.
It features the DNA-75 board and interchangeable magnetic covers as seen in the photos.
This one feels great in the hand. I love the rubberized grippy finish. I also like how they implemented the new, customizable DNA-75 LED into the fire button much like the HotCig DX75.
Here’s some additional information from VaporShark:
With its pocket friendly form factor and full suite of premium features, the SwitchBox DNA represents a familiar concept among Vapor Shark devices. But it’s the ability to take a great idea and make it even better that truly earns it a place in the family. Powered by the latest generation Evolv DNA chipset, the SwitchBox DNA packs the perfect amount of power for today’s modern atomizers and supports firmware upgrades to keep it on the bleeding edge of what’s to come. While familiar, the SwitchBox doesn’t settle for conventional- adding one of the single most requested features to the Vapor Shark line up: Multiple colors. Not only can you chose the look of your new SwitchBox, its innovative design allows you to swap out the magnetic side panels for a different color any time you want. Does your mod need a facelift? Upgrade to the SwitchBox!
Features
– Swappable Magnetic Panels (Sold Separately)
– Multiple Color Options
– Single 18650
– Powered by Evolv DNA 75
– 75 Watts of Power
– Temperature Sensing/Limiting
– Micro USB Port
– ZIP (2.0 AMP Charging)
– Illuminated Power Button
– Large OLED Display
NEW IN THE QUEUE – THE ASPIRE/MILSPEC MINI KIT – 9/15/16
This item was received in exchange for promotion and/or review.
Here’s a collaborative effort between Aspire and a new American based company called MILSPEC. It’s another mini that would have been part of the Mini-Marathon had it been received back then.
This mini is a little different and I think it’s ABOUT TIME! This is the FIRST mini device I’ve seen that utilizes a removable 18350 battery instead of an internal non-removable. So no longer are you tied to a charger with this mini, you can simply replace the battery and off you go again. Of course, it still has an on-board micro USB charger you can take advantage of. And no longer to you have a mini that’s a throw away because the battery has gone bad.
The only 18350 I’m familiar with is the AW IMR which has an 800 mAh rating with a max continuous discharge rate of 12A, but this one comes with an Aspire 18350 with a 1300 mAh rating and a max continuous discharge rate of 15A. The battery was created specifically for this device. Nice.
It will fire up to 40W and down to .1 Ohm, does temperature control with NI200, TI, and SS 316L, comes packaged with the new Aspire Nautilus Nano, and comes in black, olive, red and blue.
The kit includes:
- One MilSpec Mini 40W Box Mod
- One Nautilus Nano Tank
- 0.7 ohm Coil (Preinstalled)
- 1.6 ohm Coil
- Spare Glass Tank Section
- One Aspire 1300 mAh 18350 Battery
- One Battery Case
- One Micro USB Charging Cable
- User Manual
Smart idea on the battery case as you’ll probably need to carry more than one battery with this one so the box is a nice touch. Better then throwing them loose in your purse. Right Shari? 🙂
Here’s some additional information found on Vapor DNA:
Aspire and MilSpec Mini Nautilus Nano 40W Starter Kit
The Aspire and MilSpec Mini Kit combines MilSpec’s new Mini Box Mod platform, that features a 40W maximum output and temperature controlled powered by a single 18350 battery, and the new Nautilus Nano, a platform that expands overall airflow while now featuring a convenient top fill system. The MilSpec Mini Box Mod is an ultra compact system that measures 62mm by 33mm by 22mm and is powered by the 18350 battery size, with one Aspire 1300 mAh 18350 included in each kit. Output features a range of 1 to 40W and is adjustable in 0.1 ohm increments. Temperature control is also integrated on board with Ni200 Nickel, Titanium, and Stainless Steel 316L support with a range of 200 to 600 degrees Fahrenheit. The MilSpec Mini features a classic control interface, with a three button scheme coupled with a 0.49 inch OLED screen that neatly displays output wattage, temperature, atomizer resistance, and battery life. Users can also charge the device directly from the Micro USB Charging Port positioned below the control buttons for convenience. Coupled with the MilSpec Box Mod is the new Aspire Nautilus Nano, fundamentally grounded in the classic Nautilus design while expanding airflow and introducing a new sub-ohm coil structure. The Nautilus Nano is top filled via a threaded and gasket sealed design with a 2 milliliter tank capacity. Airflow has been expanded feature dual adjustable airslots with each airslot measuring 6mm by 1mm. Compact, affordable, and with flavor orientated output, the Aspire and MilSpec Mini Kit is a fantastic offering at it’s price point.MilSpec Mini Box Mod Features:
- 1 to 40W Power Output
- 0.1 ohm Atomizer Resistance Range
- Adjustable in 0.1W Increments
- 0.00V to 9V
- Temperature Control Output
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel 316L Support
- 0.1 to 1 ohm Atomizer Resistance Range
- 200 to 600 degrees Fahrenheit Range
- 0.49 Inch OLED Screen
- Output Wattage
- Output Temperature
- Atomizer Resistance
- Battery Life Readout
- Ultra Compact Design
- 62mm by 33mm by 22mm
- Three Button Control Face
- Micro USB Charging Port
- Dual Magnetic Battery Door
- 18350 Battery Sized
- Spring Loaded Positive
- Aspire 1300 mAh Battery Included
- Stainless Steel 510 Connection
- Spring Loaded Contact
- Low Power/Short/Low Ohm/No Atomizer Weak Battery Protection
Nautilus Nano Features:
- 19mm Diameter
- Top Fill Capability
- 2.0ml Tank Capacity
- Nautilus Coil Structure
- Vertical Coil Arrangement
- 0.7 ohm
- New Structure
- 18 to 23W
- 1.6 ohm
- 3.3 to 4.2V
- Dual Adjustable Airflow
- 6mm by 1mm
- 7mm Bore Drip Tip
- Gold Plated Contact
- Stainless Steel and Glass Construction
NEW IN THE QUEUE – THE JD TECH STINGRAY BOX STAB WOOD VERSION – 9/15/16
This item has been received in exchange for promotion and/or review.
THE JD TECH STINGRAY BOX STAB WOOD VERSION
When I found out this was heading my way, I was excited and that doesn’t happen very often when it comes to mods. Why? Because not too long ago, the Stingray from JD Tech was one of my fav mechs. Now they not only have a box mod, but also a stab wood version.
BTW – “not too long ago” is around 2 years which is like 15 in vape years. 🙂 Thanks a lot for slowing down all of that progress FDA. Sincerely appreciated (sarcasm intended).
She’s a sexy beast. She’s powered by a Yihi SX350J V2. Would LOVE to see this in a DNA-75 variety as I do prefer that board.
The 510 is a silver plated copper and is spring loaded, the 510 threading is stainless.
She’s also an expensive date. You’re going to pay a suggested retail of $550 for this one and they will be available at www.dragonsdenvapor.com.
Since I’ve already done a review of the SX350J V2, this one will likely show up as a show and tell in a video coming soon.
All the typical SX350J V2 specs apply:
- Variable Joule supporting Ni/Ti/SS……
- New innovative technology: Temperature Coefficient of Resistance, compensate temperature and SXi-Q control system (Customize your own taste).
- Temperature control. Anti-dry burning technology.
- Output Joule:10J-75J. 200-580° F/100-300°C.
- Resistance: 0.05-0.3ohm(Joule mode).
- Joule (the unit of energy,watt*time).
- Single battery 75W regulated, 85W in bypass mode(direct connection mode, allowing your device to become a mechanical mod).
- Output Voltage: 1.0 – 9.5 Volts.
- Resistance: 0.15 ohm – 3.0 ohm(Power mode).
- Taste modes: Powerful+, Powerful, Standard, Soft, SXQ-S1~S5
- Buck-Boost&Boost, DC-DC Converter.
NEW IN THE QUEUE – THE JOYETECH EVIC VTC DUAL – 9/15/16
This item was received in exchange for promotion and/or review.
Ok, is anyone else getting confused by the “plethora” or product coming from Joyetech?
You gotta love them though. They continue to come up with unique and innovative ways to get you to spend your money on the same product. 🙂
Ok, I’m kidding (a little). The eVic VTC Dual is one part Innokin Disrupter, one part eVic VTC Mini, and one part “squished” Cuboid.
With this one, you can remove the control head, much like the Innokin Disrupter. You then have a choice of two battery holders which will change the size and wattage capability of the device. Use the single 18650 battery holder and you get a slightly larger eVic VTC Mini (see photos – the Dual is on the left) with a max of 75W. Use the dual 18650 battery holder which will give you a much larger device and the 150W… kinda like a “squished” Cuboid.
This one comes in black, white, blue, burgundy, and orange.
Here’s some additional information from Joyetech:
eVic VTC Dual features the replaceable back cover for alternatively using one or two cells as you prefer where maximum output can be reached to 75W and 150W respectively. eVic VTC Dual combines unique and attractive styling with a super large OLED screen, supporting VW/VT/Bypass/TCR modes. It also comes with upgradeable firmware and dual battery protection system. In addition, there are various attractive colors for you to choose.
Standard Configuration:
1 * eVic VTC Dual Battery
1 * Dual Back Cover (for 1 cell)
1 * USB Cable
1 * User Manual
1 * Warranty Card
1 * Warning CardSpecification:
Size: 23.00*38.00*86.00mm (with one cell)
23.00*55.50*86.00mm (with two cells)
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes
Output Wattage: 1-75W(one cell) /150W(two cells)
Resistance Range: 0.05-1.5ohm for VT/TCR mode
0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Colors: Black, White, Burgundy, Blue, OrangeeVic VTC Dual comes with the replaceable battery cover, with which you can use one or two cells as you prefer.
Simply hold the battery cover and slide to take it off. Put the battery into the cover and push it back into the body.With the Onboard Reverse Polarity Protection,
it will protect the device from damage in the event of reverse battery installation.
We kindly recommend high-rate 18650 cells with rated discharge current25A.
eVic VTC Dual applies two sets of battery protection circuit system, realizing overall battery protection of over-charging,
over-current and over-discharging, which makes it more safe and reliable.eVic VTC Dual comes with the upgradeable firmware.
Having the latest Version 4.02, new interface, multiple modes and functions are available.
NEW IN THE QUEUE – THE ARCTIC DOLPHIN ADONIS (NOT DIMITRIS) MAX – 9/15/16
This item was received in exchange for promotion and/or review.
Remember the Arctic Dolphin Adonis review I did? Well, it’s like that only bigger.
Arctic Dolphin Adonis Plus is the first 100W stabilized wood box mod with temp control in China market.Fashion and cool facade.It can support Ti/Ni/Pt/SS wires.Arctic Dolphin Adonis Plus will be your first choice for the vapers.
The main difference between this and the original Adonis is that this one uses a 26650 and… supposedly… does 100W. I say “supposedly” because I didn’t have much luck getting the Stout to hit 100W using several different 26650 batteries.
I’m a little surprised that it doesn’t come with an adapter allowing you to use an 18650. I’m also surprised at the size of this especially when I sit it next to the Hotcig DX75 which also uses a 26650 (see photos).
Although the woodwork on this one looks better than the original Adonis, it still just doesn’t… well… “feel” like the asking price. Some of you will know what I mean. I only saw one price for this out there and it was $250. I would imagine many would have an issue paying that price and only being able to select the frame color as well, which I believe is how it works.
Here’s some additional information:
The Adonis 26650 100W is Arctic Dolphins next effort into the stabilized wood game. The Adonis 26650 100W features temperature control mechanics with a range of 200° – 650°F / 93°C – 343°C with support for Titanium, Ni200 Nickel, Stainless steel, and Platinum and features a unique stabilized wood design. Each Adonis 26650 100W has an exclusive finish and will look different between mod to mod. You will be able to choose the color of the frame (in either silver or black) but the coloration of mod will vary from unit to unit. The Arctic Dolphin Adonis features a micro USB charging and accommodates a single 18650 sized battery (not included).
Product Specifications:
- Dimensions: 90.0mm x 46.0mm x 27mm
- Accommodates a single 26650 sized battery (not included)
- Output wattage range: 5.0 – 100.0 watts
- Temperature control range: 200°F – 650°F / 93°C – 343°C
- Temperature control resistance range: 0.06 – 1.0 ohm
- Power mode resistance range: 0.1 – 2.5 ohm
- Screen size: 0.69″ OLED white backlit screen
- Input voltage range: 3.1 – 4.3 volts
- Max output voltage: 9.0 volts
- Maximum output current: 25 amps
- Charging output voltage value: 4.75 – 5.5 volts
- Charging input current value: 1 amp
NEW IN THE QUEUE – THE INNOKIN ITASTE HUNTER VAPE – 9/15/16
This item was received in exchange for promotion and/or review.
THE INNOKIN ITASTE HUNTER VAPE
Here’s the last one for the day from Innokin… the Hunter Vape.
This is a unique looking piece, which I’ve come to expect from Innokin. They’re calling it “rugged and perfect for the outdoors”, but I’m not seeing any water proof or resistant specification. Hmmm…
The device uses an 18650 and features variable wattage up to 75W, temperature control for SS 316L, NI200 or TI coils, and will fire down to a .1 Ohm load.
Quite surprising to not see an on-board charger these days, so you will need an external one for your 18650.
The kit is paired with an iSub V tank.
Also, the little clip on the side. What is that for? I don’t know! Is it a belt clip? It is a bottle opener? Is it just for looks? Is it to get caught on something and tear the mod out of your hand? I’m really not sure. I searched the box for a lanyard or something for your belt or SOMETHING with no luck. Nothing in the manual either. I’m having one of those, “don’t garnish unless you can eat the garnish” moments. 🙂
Here’s some more information from Innokin:
iTaste Hunter Vape profile
The iTaste Hunter is powered by the Ultra-fast advanced AETHON chipset with 75W of real power, ClearWave signal smoothing technology and a replaceable 18650 battery design focused on durability and safety.
Choose your favorite Stainless Steel316L, Nickel200 or Titanium coils and get ready for an amazing vaping experience with no more dry hits!
Pure Power, Total Control, Huge Clouds. Get ready to experience true vaping excellence with the Innokin iTaste Hunter!!
Operating Temperature Range:
150-315 °C 5°C increments
300-600 °F 5°F increments
Operating Wattage Range: 6.0 – 75W .5watt increments
Precision Temperature Control
Direct Current – Steady Power Output
Balanced Even Coil Heat-Up
Ultra-low External Heat Generation
Dry Hit Detection & Prevention
Ultra Low Standby Power ConsumptionTechnical detail for iTaste Hunter Vape:
Battery: Replaceable 18650 (not included)
Maximum output Wattage: 75W
Maximum output Current: 27.5A
Maximum output Voltage: 7.5V
Atomizer Resistance: 0.1Ω (Minimum)
Temperature Control Mode: Ni (0.1-0.2 Ω), Ti (0.1-0.5 Ω), Stainless Steel 316L (0.2-1.0 Ω) coils are recommended.
Important: Temperature Control is only available with T.C. compatible coilsFeatures and Specs for iSub V – Vortex Edition:
- Dimensions: 2″ x 7/8″ (Including Drip Tip and Threads)
- Quick & Clean Top-Fill
- 3.0ml e-Liquid Capacity
- 100% Stainless Steel
- Fully Adjustable Airflow
- Removable Delrin Drip Tip
- Replaceable Glass Tank
- No Spill Coil Swap System
- Includes (2) Stainless Steel 316L 0.5ohm Atomizer Heads for Variable Wattage or SS316 Temperature Control Mode
- iSub Coils Compatible
NEW IN THE QUEUE – THE INNOKIN SMARTBOX – 9/15/16
This item was received in exchange for promotion and/or review.
Here the second one from Innokin for the day. This one is called the SmartBox.
It uses an 18650 battery (not included) and supposedly you “attach your favorite DTL or MTL coil and the SmartBox will AUTOMATICALLY detect the resistance and set the perfect wattage to deliver an amazing vaping experience. One button, perfect vape!”
Now of course the “perfect wattage” is being dictated by someone who is not you, and only you know the perfect wattage for you, so this type of thing always concerns me. I guess we’ll see when we get to it!
You’re probably going to want to keep TC coils such as NI, TI, and possible SS off of this one, and as you can see below, they’re only recommending kanthal coils.
Here’s some additional information from Innokin:
Innokin SmartBox profile
The SmartBox is an ultra-compact vaporizer with automatic intelligent wattage control for a great vape, every time! It’s Perfect & Easy!
Attach your favorite DTL or MTL coil and the SmartBox will AUTOMATICALLY detect the resistance and set the perfect wattage to deliver an amazing vaping experience. One button, perfect vape!
Made with top quality, long lasting components, the Innokin SmartBox is powered by a single 18650 battery (not included) charged by a separate battery charger. The green/white LED on the base easily identifies the current wattage mode and the power button LED clearly displays remaining power.Coil Range: 0.35 ~ 3.5 ohm
Max. Wattage: 45W1 x SmartBox (Replaceable 18650 battery-Not included )
1 x iSubV 2MLTank
1 x Extra iSub Coil (0.5 Ohm)
1 x Extra iSub Coil (1.2 Ohm)
1 x Vape Band
1 x Mouth to Lung Drip Tip
1x Spare O rings
1 x Gift boxRecommend use is with Endura and iSub series tanks.
Recommended iSub coils are iSub Horizontal Kanthal 0.5Ohm, Kanthal 2.0 Ohm coils, and iSub Kanthal BVC 0.5Ohm coils.Available Purple , Silver , Black , Blue and Red colors
Technical detail for Innokin SmartBox Vape:
Reverse Polarity Protection
15 seconds cutoff
Low Voltage Warning
Short Circuit/Atomizer Protection
Battery capacity indicator Lights
Battery: Replaceable 18650 (not included)
Maximum output Current: 10A
Maximum output Voltage: 4.2V
Max. Wattage: 45W
Atomizer Resistance: 0.35 ~ 3.5 ohm
NEW IN THE QUEUE – THE INNOKIN ITASTE EZ.TC STARTER KIT – 9/15/16
This product was received in exchange for promotion and/or review.
I love to see “EZ” when it comes to “TC”!
Innokin has a few new devices out and here’s the first one for the day. It’s the iTaste EZ.TC.
This one has a built in 1500 mAh battery, comes in 7 different colors, and features a dial on the bottom (which I originally tried to unscrew to put the battery in 🙂 ). The dial has 4 settings which correspond to 4 different temperature settings (see photos).
It comes paired with the iClear20D tank and does TC and dry burn protection with the included SS316L EZ.TC Coils.
The kit I received came with:
- iTaste EZ.TC Device
- iClear20D
- Charge Cable
- .5 Ohm SS316L EZ.TC Coil
- .3 Ohm SS316L EZ.TC Coil (installed)
- User Manual
Here’s more information from Innokin:
The new Innokin EZ.TC ultra compact vaporizer is small, sleek and smart. Turn the dial to vape from four optimized temperatures and enjoy perfect full clouds of flavors with trusted Dry Hit Prevention.
The advanced temperature control EZTC technology is paired with the new Innokin iClear20D Tank and Stainless Steel coils. The 20D Tank is crafted with high quality stainless steel and Pyrex Glass and has an easy to use top fill and leak resistant cover design.
For optimal temperature control and harm reduction, the iClear20D Coils are built with Stainless Steel wire and organic cotton. They also use nonstandard threading for more frequent calibration and an overall better vaping experience. If the 20D coil becomes dry, then the device will decrease the output to limit & prevent burning while reducing exposure to harmful byproducts.
The Innokin EZ.TC is available in 7 beautiful and durable finishes (Green, silver, purple, red, black, gold, blue) with an integrated 1500mAh battery (charged via microUSB) and has over-discharge, device overheat, short circuit, low resistance, and firing cutoff protections.
Important: Only for use with SS316L EZ.TC Atomizer & Coils.
SEVIA-USA CONFERENCE HELD IN SHENZHEN
On September 3rd, SEVIA (Shenzhen Electronic Vaporizer Industry Association) held a conference in Shenzhen, the heart of electronic cigarette industry, to discuss the FDA deeming regulations and the latest status of the lawsuit that SEVIA-USA financially supported.This was truly a historic event in a standing room only of around 140 manufacturers and distributors of vapor products.
Dimitris Agrafiotis Chairman of SEVIA USA presented the current FDA regulatory regulations and what the organization has done so far assisting the advocacy and litigation efforts. He also presented the challenges that lay ahead.
Azim Chowdhury, partner of Keller and Heckman LLP at Washington office and expert of FDA regulations, explained the latest interpretation of the FDA deeming regulations from legal point of view.Mr. Chowdhury reviewed lawsuits against FDA in the past, which shaped the e-cig industry, and how the e-cig industry came under the control of the FDA. From a legal point of view he explained where FDA is violating laws with their deeming regulations and Azim also brought us up to date with the latest status of the lawsuit that SEVIA USA has financially supported.
Dan Donahue, a representative of the vape shops in the US and owner of Good Karma Vapor, gave a moving speech about the serious situation facing businesses in the United States and how all of us must work together in order for vaping to survive.
The conference was a huge success that yielded an increase in membership for SEVIA-USA and announcements coming very soon.
Thursday September 8th also marked a historic moment when SEVIA-USA board and members met at the SMOK company headquarters. Fierce competitors setting aside their differences and discussing the upcoming challenges. Present were, Aspire, Innokin, Kanger, Smok, Joyetech, Wotofo, Sense, EhPro, IJOY, Ave40, Horizon, Tesla and Elego. The meeting yielded wonderful results and commitment for additional financial support to the efforts of SEVIA-USA.
I’m very proud to be a part of SEVIA-USA and would like to thank all the participating members for their continued support and assistance in funding our fight against the over-reaching FDA regulations.
[slideshow_deploy id=’13934′]
Store
