Category: Rebuildables
THE EXPROMIZER!
A PBusardo Review – The eXpromizer
In this video we take a look at the eXpromizer, talk about my likes and dislikes, do a build on it, and put a concern I have to rest. Enjoy!
Thanks to Stephanie Roberts for getting me this for review!
The Links:
eXvape
Liberty Vapor
The Video:
The Photos:
THE AQUA RTA
A PBusardo Review – The Aqua RTA
In this video we take a look at the Aqua RTA by Footoon.
Thank you to Dimitris for supplying the review unit.
Build specifications seen in this video…
Two 9 wrap coils of 28 AWG around a 2.25mm bit.
Organic cotton for wick.
The Links:
VapingCraze
The Video:
The Photos:
THE ELECTRIC ANGEL NEBULA GENESIS ATOMIZER
It’s been a trying night in review land tonight.
I grabbed the Electric Angel Nebula out of it’s slot for a review. The goal was to build it and begin the evaluation.
Here’s a little detail on the atty:
- Stainless steel body
- Borosilicate glass tank
- Adjustable air flow controller with 1, 1.2, and 1.6mm air holes
- An insulated 2.25mm wick hole
- 22mm in diameter
- 4ml tank capacity
- Brass connections
- Holes in the posts for easy coil installation
- Includes mesh, 32 AWG Kanthal, and spare o-rings
- Price is 119,00€ = $164.20
- Available from Electric Angel
The issues began right away.
- The first thing I noticed was the VERY SMALL wick hole. I’m not a fan of tiny wick holes in the genesis design which limit larger wicks with more liquid capacity.
- I tried to remove the glass from the atomizer’s body. I was applying so much force I started to worry about it breaking so I gave up.
- I built my coil with the plan of using a small cotton wick pushed into the tank. When installing the coil, I noticed the negative screw didn’t tighten, it just kept spinning. I tightened it as best I could.
- When I tried to position the coil, the negative post snapped off rendering the device useless.
I’m not going to spend time on a video for this. Unfortunately, this one gets a thumbs down and will be removed from the queue.
THE 3D DRIPPER BY ATMOMIXANI
A PBusardo Review – The 3D Dripper by Atmomixani
In this video we take a look at the 3D Dripper by Atmomixani.
The Links:
Atmomixani – Manufacturer
Vaperev – US Vendor
The Post Review Follow-up:
- 3/28/28 – Something I totally failed to comment on in this video is cleaning!! This is a THUMBS DOWN as you basically have to remove your build to get the plunger section out to get at the tank. A potential work around would be to use a syringe with water to clean out the tank section without removing it much like you may do with some of your genesis style atomizers. Once the water runs clear, you can remove as much water as you can with the syringe and then fill it with the new liquid.
The Video:
The Photos:
THE OMEGA RDA AND THE TITAN CONTEST WINNER
A PBusardo Review & Contest Winner – The Omega RDA
In this video we take a look at the Omega RDA from Vapor Bombz. The version seen in this video is no longer available, however, another run may be created.
There is also a V1.5 and V2.0 coming soon. As I can give more information on them, I’ll post it here.
We also find out who won the Titan contest!
The Links:
Vapor Bombz
The Video:
The Photos:
THE FOGGER V2.5?? & SOMETHING FOR THE LADIES!!
A PBusardo Review & Contest – Something for the Ladies & The Fogger V2.5? RTAs
In this video we take a look at the new Innokin Shine MVPs and some vaping accessories for the LADIES, we review (get cranky over) the Fogger V2.5?? 🙂 And we have a LADIES ONLY contest!!
The Links:
Innokin
Night Owl
VaporCigzz
VaporBeast
Stormys Vapor Cellar
The Video:
The Photos:
THE CHRIS CREATIONS NOVICE HYBRID
A PBusardo Review – The Novice Hybrid
In this video we do a shout out on a liquid, review the Novice Hybrid from Chris Creations, and wrap it up with a quick show & tell.
The Links:
Madd Catt Vapors
OKC Vapes
Affordable Mods
Anodizers Are I
The Video:
The Photos:
THE GAMMA TANK REVIEW & CONTEST!
A PBusardo Review & Contest – The Gamma Tank
In this video I give a quick thanks to Andre from the House Of Vapor for the vape meet, we talk with Mr. Chen Ping Wong from Many Croud Vaping, and we take a full look at the Genesis style Gamma Tank from Budz Worx including a dual microcoil cotton build. We also have a contest for a Mini Gamma Tank!
The Links:
Mountain Oak Vapors
The Video:
The Photos:
LET’S VAPE THE SQUAPE!
A PBusardo Review – Let’s Vape the SQuape!!
In this video I give you a heads up on the Spectrum M1 mech and then we take a full look at Swiss made SQuape RTA.
The Links:
VapeRev
Dampfzauber
InTaste
The Video:
The Photos:
THE IGO-F(AIL)
A PBusardo Video & Review – Contest Winner, HouseKeeping, zArrAs DTs & IGO F
In this video we do some house keeping, talk about some of my comment questions, take a look at the zArrAs line of Drip Tips, do a quick review on the IGO-F, and find out who won the “choice” contest.
The Links:
InnerVape
ConstantVapor
The Video:
The Photos:
Store
