Category: Devices

A PBusardo Review – StarfireCigs Starter Kit & VTR Contest Winner

In this video we talk about the Kick Ash Vapes party, do a review of the StarfireCigs, and see who won the VTR contest.

The Links:
Starfire Cigs

The Video:

The Photos:

A PBusardo Review – A Heads Up on the Lambo 6 0

In this video we take a quick look at the new Lambo 6.0 and a potential issue with the device.

The Links:
SmokTek (Not SmokTech)

The Post Review Follow-Up:
Smoktek is doing a write-up of their conversation with L-Rider regarding the potential issue. Look for it here soon.

• Batteries used for this test were 2 AW-IMR 18650, 2000mAh, 1 eFest 18650, 2000mAh, 1 Panasonic CGR 18650, 2250mAh.  All were fully charged.  You can even see in the video the voltage of the battery was showing 4.1V when the issue displayed itself.  The Panasonic took a little longer to display the issue, but it did eventually.  When the device displayed the issue, the same batteries were put into DNA-20 and other devices and fired the device without issue.

The Video:

A PBusardo Review & Contest – The Innokin iTaste VTR, holster, and new iClear30s!

In this video we take a full, and rather long look at the new Innokin iTaste VTR, the new holster, and the new iClear30s. Then… WE GIVE ONE AWAY!!

The Links:
Innokin

The Video:

The Photos:

A PBusardo Review & Contest – iTaste MVP V2

In this video we take a look at the new Innokin MVP V2 AND we give one away!

The Links:
Innokin
Fairy-Gift

The Post Review Follow-Up:

• 9/12/13 – Someone asked me if it still wobbles.  Yes, it does slightly.  Looks like it’s still caused by the on/off switch to the power output.  Which is too bad because my 1.5 doesn’t have any wobble at all.  Add this to the thumbs down.
• 9/12/13 – Someone asked me what the pressure was to push in the 1.0/1.5 button.  Very similar to the other devices I tried.   Around 1 lb of pressure according to the gauge.
• 9/12/13 – Someone asked me what the mAh rating is on the Samsung battery that I charged off the MVP.  Also a 2600 mAh battery.
• 9/12/13 – I never mentioned the inability to adjust DOWN as a thumbs down.  Let’s add that to the list as well.  It’s not a big deal in VW as there are so few settings, but if you’re at 5V and you wan to go to 4.9V, it is a bit of a pain.
• 9/13/13 – I’ve heard from Innokin that the “stiff button” was limited to the first 200 production units.  UGH!!  I’ve requested another unit to see if I can validate this claim.
• 9/13/13 – In looking over the voltage charts based on a comment from a YouTube subscriber, I noticed that the unit fires high in some cases in VW due to it’s minimum voltage setting of 3.3 volts which it can’t go below.  So this is a device limitation and may not be “flaky wattage numbers”.  Let’s see how the new button feels and perhaps we can move this device to the “thumbs up” category.
• 10/22/13 – I’m beginning to hear complaints that the center post on this device is too low.  I’ve recently experienced that myself when screwing things down on it.  Innokin is looking into it.  Be aware!!

The Video:

The Photos:

A PBusardo Review – The Cyborg

In this video we take a look at the Cyborg DNA-20 Powered tube mod from Fluid Vaper.

The Links:
Fluid Vaper

The Video:

The Photos:

For all the details on the DNA-20 including features, settings, capabilities, shortcomings and numbers, please see this video:

A PBusardo Review -The DNA-20

Although I took a look at the DNA-20 in the Opus-D review, I wanted a stand-alone DNA-20 video I could refer people to when looking at DNA-20 devices in the future.

Some review in this one, but it’s all-inclusive.

Hope it helps some of you out there.

The Links:
EvolvVapor

The Video:

The Photos:

A PBusardo Review – Innokin iTaste 134

The Links:
Innokin

The Video:

The Photos:

A PBusardo Review – VapeOnly BCC Mini & iTaste VV V3

In this video we take a quick look at the VapeOnly BCC Mini and a little longer look at the Innokin iTaste VV V3. We also find out who won the JJ Vapes eGo kit contest.

The Links:

LiteCigUSA
Innokin

Thanks to JJ Vapes for the contest giveaway!
JJ Vapes

The BCC Mini Update:

6/29/13 – So do you remember when I said in the review that I heard stories about the VapeOnly BCC Mini cracking at the threads.  No need to read anymore… just see the second set of pictures below.

How did it happen?  Not sure really.  The rig was in my pocket.  Wasn’t doing anything strenuous (or climbing ladders), just walking around the house.  I reached into my pocket and was greeted by a juicy mess (get your mind out of the gutter).

This really bummed me out because I was enjoying this little ce style tank.  I actually thought the flavor and performance was slightly better than the EVOD.  This changes the review to a thumbs down.  They need to beef this little guy up a little bit.

I’m happy to report that the iTaste VV made it through the rain.

The Video:

The Photos:

A PBusardo Review & Contest – The Smoktech SID

In this video I do a little bit of ranting then we get down to business and take a look at the NZonic V3 made in the Philippines by Madz Modz. We also see some drip tip offerings from them.

The Links:

SmokTek
Thanks to JJ Vapes for the contest giveaway!
JJ Vapes

The Video:

The Photos:

A PBusardo (not really a) Review – Some fun stuff and the Sigelei S-Max

In this vid we have some fun, talk about the Shredd & Ragan Cruise Night, the Tatroe Tank, the Sigelei S-Max, some other Maxs, and the Feta-Max Prototype.

Post Review Follow-Up:
6/3/13 – All new S-Maxs are now being delivered with eGo cone threading as well.

The Links:
Shredd & Ragan Cruise Night
CigTechs
SmokTek

The Video:

The Photos: