Author: pbusardo
NEW IN THE QUEUE – 3/30/15 – THE SPHEROID V3 & THE PICCOLO V4
THE SPHEROID V3 & THE PICCOLO V4
This is a sexy little Greek piece (no, I’m not talking about Dimitris)… from VapourArt comes the Spheroid V3 and the Piccolo V4.
The Spheroid V3 is an RTA that uses a filler material which is soaked with e-liquid and feeds the coil’s wick from above.
The Piccolo V3 is a 14500 mechanical.
NEW IN THE QUEUE – 3/30/15 – THE ELEAF LEMO 2
Here’s a first look at the Eleaf Lemo 2. I’ve been told this is a pre-market version and I’ll receive a market version soon. Good thing too because I had to literally destroy it to get the chimney unscrewed from the build deck. The screw in the final picture wasn’t me… I swear!! 🙂
Let’s hope the final market version leaves me in a better mood.
From Eleaf…
The Lemo 2 is the advance version of the well-known Lemo series atomizers due to its new innovative design of a side e-liquid fill hole and the use of PEEK(the well-known high heat and corrosion resistance material) of insulating piece. Vaping becomes safer and more stable, and no more needs of detaching the atomizer during refilling. The fill process becomes easier and leakage can be avoided. The inheritance of RBA head also maximizes the fun of DIY experience and could bring cloud vapor production for you.
Parameter:
Length: 76.2mm
Diameter: 22mm
Liquid Capacity: 3.8ml
Rated Resistance Range: ≥0.3Ω(Default configurations: )
Resistance of the Pre-made Coil: 0.5Ω
Diameter of the coil: 0.5mm
NEW IN THE QUEUE – 3/30/15 – THE DOVPO DT-50
…And you thought the MVP 3.0 was big?
This is a 50 watt box mod (VW only) from DOVPO, the same folks who brought you the E-LVT. It features a built in 4000 mAh lithium battery and will fire down to a .2 Ohm load. Sounds like it retains your setting based on your attached resistance. I’ll know more when I get to the review.
- OLED display screen
- Output Power:5-50W
- Intelligent memory:retain memories of the last resistance adjustment of power parameters, recycle use the same power will automatic matching
- Minimum resistance 0.2Ω
- Short circuit protection
- Low-voltage automatic protection:voltage lower than 2.5V
- Automatic Temperature protection:temperature over 70℃(158℉)
- Lithium battery automatic protection:battery won’t discharge over 25A
- Automatic fuse protection:voltage more than 30A
- Charging voltage:Micro charger DC5V
- Max current charging: 800mA
- Built-in lithium battery capacity: 4000Mah
- The top plate of the mod has an adjustable 510 firing pin and is also grooved in the fashion of crosshairs around the 510 connection for additional airflow.
- The OLED screen displays battery state, watts, voltage and ohms. You cannot vape and charge this device at the same time.
NEW IN THE QUEUE – 3/30/15 – THE YOUDE GOBLIN
This looks and feels like a pretty solid dual coil RTA similar in design to the Orchid, Billow, & Silverplay. This one comes with a 3ml tank installed, but also includes an expanded tank and chimney to get you to 4.2ml.
- Liquid Capacity – 3ML & 4.2ML
- Size – H: 46mm , Φ: 22 mm
- Material – Stainless Steel
- Airholes – fully adjustable dual 3mm air holes
NEW IN THE QUEUE – 3/27/15 – THE ATLANTIS 2 & MORE FROM ASPIRE
Looks like Aspire is coming out with some new fog machines. Take a first look at the new Atlantis 2. This one comes with .3 and .5 Ohm heads with larger liquid ports, and a tank with a larger mouth piece and an “Optimal Cooling System” which allows you to mix air into the stream at the tip cooling your tip and potentially increasing vapor.
It’s a 22mm tank with a 3ml liquid capacity.
I checked and the draw is more open than the original Atlantis even with the “Optimal Cooling System” closed. Opening it opens the draw further.
I also took a look at the coil (see images below) and can only find cotton sheets and no “flaky” or “break away” material.
In addition to the Atlantis 2, they have the Atlantis Mega. Similar to the 2 but in a 30mm format and a 5ml capacity.
Finally, the CF-MAXX… a fully adjustable, 30mm, 50 watt tube mod with an internal 3000mAh battery clearly designed for the new Atlantis Mega. No information was provided as to it’s lowest resistance capability, but I’m assuming it’s at least .3 Ohms to support the new Atlantis .3 Ohm heads.
In the photos below, you’ll see the original Atlantis (on right) next to the Atlantis 2 as a comparison.
GET’EM GUT!! – Gutfeld: California Ads Trashing E-Cigs ‘Demonize With Flimsy Lies’
Gutfeld is at it again commenting on the recent anti-vaping campaign in California.
‘They put the ‘dis’ in disinformation’
‘They demonize With flimsy lies’
‘Burps contain more facts then that crud’
‘What if it’s really about money? Don’t act so surprised, this is government after all’
Watch the video here…
Spread THIS:
Not THAT!
THE CERAVAPE HYGEIA GETS THE BIG THUMBS DOWN
A while back I posted a New In The Queue on the Ceravape Hygeia.
It’s a ceramic wick clearomizer being advertised as having “perfect taste”.
Last night I took them out, and gave them a shot.
And then I gave them another shot.
And then I manually wet the wick and gave them another shot.
Then I took the second head, primed it and gave it another shot.
Finally I took this picture…
They say a picture is worth a thousand words… I think this just about sums it up. Oh, there was also this…
And this…
It does have “perfect taste”. Perfectly dry, harsh, scratchy, oh my poor throat, wick not keeping up, so 3 years ago taste.
I even tried it after getting home from work today with the juice sitting in the tank all night and all day. Same results. A couple puffs on this one and a smoker is right back to smoking!
The ceramic wick in this clearomizer is simply not keeping up and I’m not going to subject myself or you to a review of this one.
NEXT!!!
A ROSE BY ANY OTHER NAME… THE ROSE V2-S RTA BY EDEN MODS
A PBusardo Review – The Rose V2-S by Eden Mods
In this video we take a full look at the Rose V2-S by Eden Mods. We discuss vape quality, issues I’ve had, show a build and a few different wicking methods.
This RTA is a flavor machine. Perhaps some of the best flavor I’ve experienced from a tank atty. Getting past the gurgling has been my biggest issue.
Note the build that you will see in this isn’t my typical for this device. I’d have a smaller coil in there. Somewhere between a 2.25 and a 2.5 mm. The larger coil shown was to demonstrate some of the different wicking methods. A 1 Ohm coil at 2.5mm using the single strand cotton split and down the slots is what has worked best for me to this point.
The Links:
Eden Mods
US Vendors:
Alchemist Vapor Shop And Lounge
Vapor Safari
Coval Vapes
The Video:
The Photos:
INNOKIN ENTERS THE SUB-OHM TANK GAME
(we knew it was coming 🙂 )
Here’s what I know so far:
The Innokin iSub is a new top quality Vaporizer Tank which is made of Stainless Steel and high quality German made P.C. The iSub tank has Japanese Organic cotton wicking for superior flavor and it is packaged with 2 0.5 Ω coils. The Innokin iSub tank has a compact sleek new design, a huge 4ml capacity which is perfect for sub-ohm vaping and a fully adjustable airflow system.
Utilizing the innovative Innokin ‘No-Spill Easy Swap’ Vertical DeepCoil System the new Innokin iSub Tank delivers huge clouds & intense flavor at an extremely low price!
Available early April, 2015 for $18.99 the Innokin iSub will be available soon at your Authorized Innokin Vendor.
A new study verifies that e-cigarettes are orders of magnitude safer than tobacco cigarettes
Did you catch this part?
“orders of magnitude safer”
Find out all the information on Dr. Farsalinos’ page HERE!!
Store
