Author: pbusardo
NEW IN THE QUEUE – 5/28/15 – THE BILLOW 2 BY EHPRO
The new Billow 2 is now available. She’s a dual coil RTA and a joint collaboration between Eciggity and EHPro.
We have revamped the Billow v1 with new and improved features; introducing the Billow v2! The glass section now measures 23mm in diameter (we wanted to keep the 5ml e-liquid capacity and made it shorter than the Billow v1), but the base and the top cap of the Billow v2 are still 22mm in diameter allowing it to still sit flush on all of your 22mm mods!
- New barrel and groove exterior design with two piece chimney
- Rebuild and make adjustments to your wick and coils without dumping out your juice
- Deck is designed with cotton grooves for convenient wick placement
- No more screws to fill juice or adjust airflow
- Adjustable Airflow Ring
- Peek Insulator for low sub-ohm durability
- Bigger Airflow Hole on the Airflow Ring and Deck
- Wide Bore Delrin Base Drip Tip
- 5ml Capacity
Includes:
- 1x Billow v2 RTA by EHPRO and Eciggity
- 1x Wide Bore Delrin Drip Tip
- 1x Bag of O-Rings, Screws, and Screwdriver
NEW IN THE QUEUE – 5/28/15 – THE ZEPHYRUS BY UD
Ok, I’ll take a look at this sub-ohm tank. It’s one part replaceable head clearomizer and one part dual coil rebuildable due to it’s included RBA deck similar to that of the Orchid, Billow, Lemo 2, etc.
The coil head is massive on this one and has a dual horizontal coils build in it.
I don’t have photos of the coil head broken apart yet as I only have one and I’m trying to get more.
- Authentic Hybrid Tank / RBA by UD (Youde), this is NOT a Clone
- 100% Stainless Steel Constuction
- Pyrex Glass Tank
- 5mL Juice Capacity
- Can use Changeable Sub-ohm Atomizer Heads – 0.3Ω / 0.4Ω / 0.5Ω
- Ceramic Base in Coil Head
- RBA Base – Dual positive post has two holes / post screws for easy dual coil builds
- Four (4) large 3mm airholes on bottom of the RBA Base deck
- Four (4) large juice channels (RBA Base)
- Huge Airflow, Adjustable Ring: dual 2mm x 12mm
- Spiral Engraved Drip Tip
- 22mm Diameter
Box Contents
- 1x Zephyrus Sub-Ohm Clearomizer
- 1x RBA Coil Head
- 4x Spare Tank O-Rings (Red, Blue)
- 1x Spare Top Cap O-Ring
- 1x Spare Drip Tip O-ring
- 1x Attachable Drip Tip Heat Fins
- 1x Spare Glass Tank
- 1x Spare Top-Fill Stopper
BTW – Should you want to buy it prior to the review, use code YT10% for a discount from Evcigarettes. You can use the link above.
NEW IN THE QUEUE – 5/27/15 – THE KANGER SUBBOX MINI STARTER KIT
THE KANGER SUBBOX MINI KIT
Kanger puts together another all-inclusive kit. Just add batteries and juice. 🙂 Digging the color matching tanks, especially the white version. Getting a bunch of questions on this one so I’ll try to get to the review next week.
The kit is available in either black or white and includes…
- Color matching Subtank Mini
- KBox Mini
- .5 and 1.5 Ohm OCC Coil Heads (new vertical coil design)
- RBA section
- Building supplies
Kbox Mini Specs:
- Zinc alloy body
- OLED screen
- Fires up to 50W down to .3 ohms
- User replaceable 18650 battery
- Micro USB charge port
- Magnetic battery cover
NEW IN THE QUEUE – 5/27/15 – THE SMY 50 TC & 60
I’m adding the SMY60 and SMY50TC to the SMY35 already in the queue. Both are extremely thick and bulky.
The SMY60:
- Fires down to .3 ohms, up to 60 watts
- 98.5x56x26mm
- Magnetic battery door
- Body is aluminum and carbon fiber
- Available with black, blue, and red covers
- Uses a single, replaceable 18650 battery
- Micro USB charge port on the bottom
- Color screen shows puffs, time, date, resistance, wattage, etc
- 510 pin is adjustable but not spring loaded
The SMY50TC:
- Wattage and temperature control modes
- 99x49x28mm
- Spring loaded 510 connection
- Temp mode – NI200 with resistances from .1-1.0ohms
- Wattage mode – .1-3ohms
- Uses a single, replaceable 18650 battery
- Micro USB charge port on the bottom
- Sliding battery door
- OLCD screen
NEW IN THE QUEUE – 5/27/15 – THE ADT 50W BY ARCTIC DOLPHIN
She’s a fingerprint magnet and much of the basic design looks borrowed from Vaporshark, but luckily skins are available.
The ADT 50W is a box mod that designed by Arctic Dolphin, in zinc-alloy with gloss finish. The PCB is made by themselves with USA imported chip and parts. The unique thing about the ADT 50 chip is that it allows you to set the temperature that is the highest you want to vape on, it means that you will never burn your coil when the juice is low. Also it is the only one on the market currently that will automatically check temperature 1000 times/sec to keep it accurate and prevent the coil short-circuited. It is capable of running coils between 0.06ohm to 2.5ohm, uses a separate 18650 battery (not included), charged via the included micro-USB (passthrough, can be used while charging), has a spring-loaded pin and protection against short circuit and wont fire if battery is inserted the wrong way. The display shows ohms, watts, volts and set maximum temperature.*NOTE: Temperature control function will only work with nickel wire coils.
The Specs:
- Real time constant temperature control
- Gold plated, spring loaded center pin
- Micro-USB charge port
- Magnetic battery door
- Cast zinc-aluminum body
- Available in gold, copper, silver, and black
The Photos:
THE ATTACK CONTINUES!
The attack of the sub-ohm tanks continues. I’ve received WAY too many to review them all, but I can at least show them to you. If something comes in that’s really unique, I’ll have a look. In the meantime…
The Subverter Mini by Smokme
The Specs:
- .1, .2, .5 Ohm dual coil vertical heads
- Organic cotton wick
- Kanthal wire
- Fits Aspire Atlantis Heads
- Drip tip air flow control to cool the vape
- 3 2x10mm adjustable air intakes
- 304 stainless body and Pyrex glass tank
- 4.5ml capacity
- Bottom fill
- Includes replacement tank and spare head
What’s Unique?
- The heads have some of the largest liquid intakes I’ve seen
- Looks like thick cotton as apposed to the thinner sheets we’ve seen in other designs
- Grimm Green will love the o-rings 🙂
The Photos:
The Donner by Amigo
The Specs:
- .5 Ohm vertical single coil heads
- Metal mesh around the cotton wick
- Kanthal wire
- Air flow control
- Bottom fill
- 4 ml capacity
- Adjustable 510 pin
- Includes replacement head
What’s Unique?
- A metal mesh surrounds the wick which is supposed to “really throttle the liquid flow and disperses it more evenly to prevent spit back and gurgling”.
The Photos:
The CVS by Beyang
The Specs:
- 304 stainless body, Pyrex tank section
- Cotton wick
- Kanthal wire
- Airflow control
- 23mm base
- Top spring loaded top fill
- 7 ml capacity
- Includes 3 coil heads, 1.0 & .5 Ohm single verticals and a .2 ohm dual vertical
What’s Unique?
- You fill this one from the top. The cap is spring loaded. Push it down and rotate to open for filling, then push it down and rotate the other way to close it.
The Photos:
The Herakles by Sense
The Specs:
- Stainless steel construction
- Organic cotton wick
- Pyrex tank
- 3ml capacity
- Delrin and stainless wide bore tip
- Adjustable airflow
- Comes with a .6 and .2 ohm dual vertical coil heads
- 22mm base
- Fits Aspire Atlantis Heads
- Copper pin
What’s Unique?
- Looks like thick cotton as apposed to the thinner sheets we’ve seen in other designs
The Photos:
The Vanga by Bilsen Tech
The Specs:
- 304 Stainless steel construction
- Organic cotton wick
- Pyrex tank
- 3.5ml capacity
- Delrin and stainless wide bore tip
- Adjustable airflow
- Comes with a .5 and .2 onms (yes, I said onms – look at the photos 🙂 ) dual vertical coil heads
- 22mm base
What’s Unique?
- This one measures coil resistance in onms, something we’ve never seen before!
- Has a twist, side-fill filling method similar to the Lemo 2.
- The top coil has that plastic covering on the lead similar to the Arctic.
The Photos:
Dry-burning metal coils: is it a good thing? – By Dr Farsalinos and Pedro Carvalho
In a recent interview on RY4 Radio, Dr. Farsalinos discussed issues with dry burning coils.
This caused an influx of emails to my inbox.
Remember folks… there is an important reason why all of my videos start off with “Use these products at your own risk” because there ARE risks involved. We know a lot but we’re still learning more every day. When issues are found, we need to listen, adjust, fix, or choose to accept the risk. Over-reacting and panicking doesn’t help anyone. Also, condemning the information presented and those presenting it because it doesn’t match with your style of vaping isn’t helping either, especially when the information comes from those who support us. We need the information… good or bad… then it’s up to you to decide what to do with it.
I’ve stated several times that the safest way to vape is to not vape at all, but don’t smoke either!!
There are many people who want to vape as safely as possible. These people may not want to dry burn their coil based on the information presented. Some people are willing to accept the risk.
I personally don’t want any issues with vaping to be hidden. I want to know the risks involved so I can make educated choices on how I vape. More research in the materials we use on a day to day basis is needed.
I asked Dr. F. about the information presented in the interview and he wrote a blog response. You can read it HERE.
From Denis
Hello Phil, me again.
I watched your video again this week (just like a tv show). I go every week to your website to see if you have made another one. And believe me, I enjoy every second of what you do and the way you do it. Now, my daughter (she does not smoke) want to follow you every week too.
I do not know where you get your power and strength to do all you do but you impress me.
Keep doing what you do. I am learning more and more every time…and still away from tobacco cigarette. I do not remember if I told you but I smoked during 40 years until I watched one of your video (the one that you take a cigarette in your mouth to remember the feeling) and quit right after.
Again congrat about what you do and please, please, continue doing it.
PS: I also see Lamborghini when I vape my Kangertech mini
Denis
From Bradly
Want to thank you for your no nonsense Website and videos like the comedy aswell. Last year in the first part of September I had a heart attack and bypass at age 38 I was a smoker and pipe smoker from age 19. The worst part of the whole thing was I had to quit smoking something I really loved. When I was in hospital my sister gave me a little pen vaporizer. This was a god send. I tend to research things a lot and your website was just what the doctor ordered. It also kept me laughing in the hospital bed. Know you probably get these things all the time but as alway had to drop my two puffs. oh and glad to see you make it up to my country Canada even if it was at the other end. I am an ex smoker cheers
THE HEATVAPE INVADER MINI
A PBusardo Review & Contest – The Invader Mini by Heatvape
In this video we take a look at the Heatvape Invader Mini, a rugged little variable wattage and temperature limiting device. We also give one away.
Send contest entries to: contest@tasteyourjuice.com.
Subject line of email should contain:
First Name Last Name – Contest Question Answer
The Video:
The Photos:
Store
