Author: pbusardo
Washington Post – Why the FDA’s new e-cigarette regulations are a gift to Big Tobacco (and could actually harm public health)
This is a story from the Washington Post. Click HERE to read it.
So, while e-cig use may not be risk-free (and what is?), e-cigs present a small fraction of the risks posed by smoking. This is but one reason the United Kingdom’s Royal College of Physicians urges the use of e-cigs as a tool to help smokers quit.
CASAA’S RESPONSE – FDA Deeming Regulations: Release and Next Steps
From CASAA:
FDA Deeming Regulations: Release and Next Steps
Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest
Today, May 5th, 2016, the Food and Drug Administration (FDA) has announced the final rule on docket FDA-2014-N-0189 / RIN 0910-AG38 (otherwise known as the Deeming Rule). It is important for our members to understand what happens next.
The FDA has placed the rule in the Federal Register “Public Inspection File” pending publication in the Federal Register. This is everyone’s first chance to see the new rule. It will be officially published earliest on Tuesday, May 10th.
Please keep in mind that this is not the end of the process. CASAA will continue to focus our efforts to develop sensible regulation of vapor products that will have maximum benefit to consumers. The most important thing to remember is that consumers will continue to have access to the wide variety of vapor products for a period of time before the regulations take effect. But, for now, vaping as we know it will continue and we are not done by any means. Keep calm.
CASAA will be investing our collective time and experience over the next few days to review the new rule. This review is not like reading a novel, or even the technical manual for a starship. Federal regulations are written in what we euphemistically call “Reg Speak” — legal language that defines the actions of the rule. It isn’t easy to read because quite often sentences, paragraphs, and whole sections relate to other published documents, like the Family Smoking Prevention & Tobacco Control Act, and the Food, Drug, & Cosmetics Act. These laws require skill to read and determine what is being said. This is not a job for amateurs as it requires years of practice; no single person is likely to get it right all by themselves.
CASAA is urging our members to be patient and remember that nothing in the rule will affect you tomorrow, next week, or even next month. The FDA will take time to actually implement the new rule. Please bear with all of us. We will be working diligently to provide accurate information and analysis just as fast as possible.
The most important thing you can do is to make a call, write, or send an email to your Representative and urge them to cosponsor and support HR 2058. If there is one thing that has to be done, this is it. Encourage your family members, friends, everyone who has supported your journey to participate.
Take Action – Send A Message
Here are the documents we will be reviewing:
- FInal Deeming Rule: https://s3.amazonaws.com/public-inspection.federalregister.gov/2016-10685.pdf
- Proposed Rule: Premarket Tobacco Product Applications for Electronic Nicotine Delivery Systems; Draft Guidance for Industry: https://s3.amazonaws.com/public-inspection.federalregister.gov/2016-10687.pdf
We will update this post as we move through our review of the published regulations.
FDA takes significant steps to protect Americans from dangers of tobacco through new regulation
Here is the announcement from the FDA, click the image below to be taken to it…. sorry, it’s how I’m feeling today but I think it a good representation of how our government feels about us, our rights, and our desire to live a healthier lifestyle away from tobacco cigarettes.
Again, lets let the experts analyze this and present their plans of attack.
THE REGULATIONS
NEW IN THE QUEUE – THE HCIGAR VT75 – 5/2/16
Gotta hand it to HCigar. This one looks pretty sweet. It uses a 26650 or 18650 with the adapter. It features variable wattage up to 75 watts, temperature control, and utilized the new Evolv DNA-75 board.
Here’s some more from HCigar:
HCigar lastest product VT75 box mod has been released at TPE trade show in Las Vegas,the heartbeat by EVOLV DNA75 chip.
The HCigar VT75 is a collaboration between Evolv Technologies, the makers of DNA chipsets, and HCigar, the creators of the VT200 DNA200 mod. The 75 watt mod runs on a single 26650 or 18650 cell.
The new chip set has been under wraps and in development under Evolv for some time, and the VT75 is the first mass-produced device to offer the new technology. Expect a full range of temperature control functionality as well as a host of features through the MS Windows-based Escribe software.
Features include:
- DNA75 board from Evolv Technologies
- Escribe software for full customization
- Wattage range: 1 – 75 watts
- Temp control mode for SS, Ti, Ni
- Temp adjustable TCR for your own curve
- Variable wattage mod
- Cell Type:High-rate 26650 or 18650 battery (Discharging current should be above 35A)
- Temp range: 200F – 600F
- Colors: Red & Black
- Can be set up through Escribe software
From Michael
Hi, first let me thank you for all the time and effort you put into your videos to help us vapers make better choices with our purchases. I have been watching your videos for over 4 years now starting with when you posted the boge vs smok carto video. It was that video that convinced me there was a better way of vaping then what I was doing before then. It couldn’t have come at a better time. I was at the point of giving up vaping due to the hassle which led me to search the internet for better alternatives. One of the big thanks I felt the need to send your way is for the fact you are one of the last if the not the last reviewer who still has a vape style similar to mine. Unfortunately the only other go to guy who has also been doing videos for what seems like forever has lost interest and has completely given up on being thorough in the slightest. For your continued effort I am extremely grateful.
The thanks that actually led to me sending this email has to do with the Hurricane. Since my first kayfun which was an incredibly expensive kayfun 3 ES I have been a kayfun vaper. Up until everything turned to lung hit style vaping I purchased far to many tanks and drippers just because they are new only to go right back to a kayfun. Knowing your style of vaping and seeing you show the same enthusiasm for the Hurricane as you did for the tiafun which I still enjoy I finally decided to spend the money and purchase the Hurricane and couldn’t be happier. Up until now the only real enjoyable vapes I have with temp control has been with nickel in a kayfun 3.1 or Ti in a 3.1 or dripper with a wismec rx 200 since Ti doesn’t seem to function well with my DNA 200 devices. That is until the Hurricane. It has been flawless and has given me a new appreciation for Ti and temp control. It is really nice to finally be able to carry a small dna with me and not the giant RX 200 if I am using Ti. I am a mouth to lunger who likes things simple and this tank is as good as it gets in both regards and is no slouch in flavor either. Anyways this is a long embarrassing ramble at this point and just want to say thank you for everything.
THE JELLYSLICE BY LOTUS VAPING
A PBusardo Review – The Lotus JellySlice
In this video we take a full look at the JellySlice by Lotus Vaping.
The Links:
Lotus Vaping
The Post Review Follow-Up:
- 5/2/16 – Ok gang, I had a fumble in this one. The confusion as to when you’re in TC and when you’re not has been eliminated. I thought that pressing the fire + up button would take you out of TC and that’s not the case. Once in TC, pressing fire + up will toggle between adjusting in voltage or wattage IN TC. You need to toggle TC on and off by pressing the fire + down button again. This will turn off the Fahrenheit display and put you back into wattage mode. So:
- To switch between Wattage and Voltage – Press and hold fire + up.
- You can then adjust in either wattage or voltage and you will not see the Fahrenheit display. If you do see the Fahrenheit display in the bottom right corner you are in TC.
- To switch into TC – Press and hold fire + down. You will see the temp. Adjust to your desired temp and click the fire button. You will then see the Fahrenheit display in the bottom right corner indicating you are in TC.
- You can then switch between adjusting the wattage or voltage applied in TC by pressing the fire + up button. You will continue to see the Fahrenheit display.
- To get out of TC and back into wattage or voltage, press and hold the fire button + down and the Fahrenheit display will go away. Now you’re back to adjusting in voltage or wattage.
There is no auto sensing on this device. Switching between TC and non-TC is manual.
I will say that the manual could have been a little clearer here.
Thanks for the heads up on this Oscar and my apologies for the confusion. I’ll bring it up in my next video. That thumbs down goes away.
The Video:
*NOTE: Any use of this video in part or in it’s entirety without Phil Busardo’s expressed written consent is strictly prohibited.
The Photos
SOME RESPONSE ON THE ADONIS REVIEW FROM ARCTIC DOLPHIN
I always enjoy when a manufacturer looks at a negative review as a learning experience rather than an attack. Here are some responses from Arctic Dolphin following the review of the Adonis.
You’ll notice plenty of misspelled words here. On the device, it’s no excuse, but here… let’s just say their English is far better than my Chinese.
We have improved some of the issues u mentioned in the review while others will be imoproved soon! Will keep you updated.
Regarding the mis-spelt word–Smork, we have improved already. Will send you pic.
Screen is little small and difficult to read.: we design the screen size based on the actual size of the device. By checking the size of Adonis, you wil found that the frame is narrow so the sreen size is as big as possile. Well, we will make much bigger screen for our new stabilized wood box mod with single 26650 battery.
Cannot read the cool atomizer resistance: we found you do not change new atomizer once you re-on the device after firing. Nomally, the device will read it as an old atomizer as you do not change the atomizer so that is why it read hot atomizer resistant not cool resistance.
Cannot turn on the device: The frame is aerospace aluminum by anodizing to realize insulation function. Black and silver color are both made by anodizing. The anodizing liquid has the insulation function. The battery negative pole conduct electricity by the frame. Once the anodizing insulating liquid inflowed into the battery cover thread then there will be problem for electro -conduction. That is the reason why u cannot turn on or turn off the device. The samples u received from us, considring that maybe we will scratch the frame during lathing the thread so we lathe the thread firstly but there will be problem that the anodizing insolation liquid will inflow into the battery cover thread. Now we finally found a good solution to settle this issue to avoid the scratch on the frame even we will make the black frame firstly then lathe the thread. There will be no100% or 50% failure rate. Moreover, once u cover the battery cover, u need to tighten the thread as far as possile.
At last, we love your review very much and you are the most respectable reviewer in vaping industry. Thanks for your time on our product reivew.
From Bob
Did you feel that Phil? That was a big pat on the back from me ‘cos it’s
now over two years since my vapebirthday. Never felt better and all down to you.
Still loving the videos – I watch them even if I’m not interested in what you’re
reviewing ‘cos they’re so professionally produced and entertaining to boot (
especially the cranky rants which I generally agree wholeheartedly with).
Wishing you all the best from the UK – keep those reviews coming
Bob
Store
