A CLOSER LOOK AT THE ARCTIC DOLPHIN ADONIS
“Adonis” Huh? Thought Dimitri reserved that word for himself. Anyway, here’s a closer look at the new “stabilized wood” mod coming from Arctic Dolphin.
These are not the final-final versions. These are the semi-final versions. They’ve told me I’ll be receiving the final-final versions soon. Why I have these semi-final versions… I have no idea. They’ll make good contest giveaways though. 🙂
I told then I wouldn’t do anything with a semi-final version other than show you folks, so here you go.
I still don’t have a final-final confirmed price on these and when I get that, I’ll post it here. Here’s some other information about this mod I’ve been able to locate on their website.
- Update – 3/30/16 – I just found out that the cost will be about $300 and the run will be limited to 3000 pieces. I have a feeling that some will find that a tough nut to swallow for a Chinese piece, but we’ll see.
Features:
* Constant Temp Control
* Stabilized wood facade design
* Single 18650 battery
* Support Ti/Ni/Pt/SS wires
* Micro USB Charging
* Atomizer ohm Adjustment InterfaceProduct Parameter:
Temp Control:200~650℉ （93~343C°）
Wattage:5~80W
TC Resistance Range:0.06 – 1.0ohm
Wattage Resistance Range:0.1 – 2.5ohm
Screen Size: 0.69 inch OLED White screen
Input Voltage Range:3.1V-4.3V
Max Output Voltage:9V
Max Output Current:25ACharge Port:Micro USB
Charge Output Voltage Value:4.75V~5.5V
Charge Input current Value:1A
Charge Output current Value:30A
Size: 90*46*27mm
NEW IN THE QUEUE – THE SQUAPE X [DREAM] – 3/29/16
I’ve always liked the Squape and always hated filling it. 🙂 This one offers some new features that are going to make filling it far easier. Really looking forward to building this one and trying her out!
You can easily put a single or dual coil in this one and get proper airflow for either, although I would have liked to see a Velocity styled deck in it. As, as usual, I’m truly hating the tiny hex key needed to create your build.
More information from Stattqualm and additional photos below:
The SQuape X[dream] is a rebuildable tank atomizer which was developed and produced in its entirety in Switzerland. It is made by StattQualm GmbH to be used for the vaporisation of e-liquid. The SQuape X[dream] can be closed off completely by a slight rotation of the tank and is therefore absolutely leak-free. Because of the closed system the tank can be taken off the atomizer and transported empty or full. Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomizer-chamber (consisting of ematalised aluminum).
Data
– Diameter: 22 mm
– Hight (without SQuip Tip and 510 connector): 54,4mm
– Weight (without SQuip Tip): ~ 80g
– Threads: 510
– Tank volume: ~ 4.0 mlStainless steel components: Steelnumber 1.4404 / 316L; Glass: Borosilicate glass; Deck and closing ring: Aluminium, ematalised; Centerpin and poles: Ecobrass, gold-plated; O-rings: nbr 70 shore
Features
– Top Filling
– Stepless Airflow Control (replaceable)
– Single- or dual coil usage
– Adjustable 510 connector (gold plated)
– Replaceable borosilicate glass
– Deck is accessible even with full tank
– Nonconductive components inside the evaporation-chamber (deck and closing ring) – no danger of short circuits
– No limits to thicker wires through pins with wire holes (2.2mm) and wire fixation through grub screws
– Gold plated contacts
– Suitable for Temp. Control and V/W mode
– The tank can be completely closed and removed (even when full)
– Easy switching of the three positions „vape“, „remove“ and „closed“ with the 3-mode-lockRRP: CHF (Swiss Franc) 149.00 = $154 US
NEW IN THE QUEUE – THE BEYOND VAPE CENTURION – 3/29/16
Looks like the Stout has some competition. This is the new Beyond Vape Centurion. A 26650 (or 18650 with the insert) 100W TC device.
It comes in black or white and is available on the Beyond Vape website for $90.
The specs appear to be the same as the Stout and considering it’s manufactured by Wismec, probably has the same board as well. This one, although a little more ergonomic, is also substantially larger than the Stout (see the photos below).
Here’s the info from the Beyond Vape website with some additional photos for you below.
Product DescriptionCenturion 100W TC Box Mod White by Beyond Vape x Wismec (Black)
The new Centurion 100W TC Box Mod by Beyond Vape and Wismec gives you the clean, compact feel of a smaller device with the prolonged battery power of a 26650 powered unit. Accommodating a standard 22mm up to a 30mm atty or tank, the Centurion looks great no matter what you’re running on it. With its ergonomic, contoured design and trigger-style fire button, the Centurion is all about comfort, grace, and power.Features:
- -Designed by Beyond Vape, manufactured by Wismec
- -Compact, ergonomic design
- -Accommodates 22mm to 30mm attys or tanks
- -Decorative 22mm beauty ring
- -Spring-loaded 510 connection
- -Trigger-style, fire button
- -OLED Screen
- -Conveniently placed + and – buttons
- -Bottom-loading, threaded battery cap – no battery rattle
- -Micro USB cable included (for firmware upgrades, not recommended for charging)
- -Single 18650 battery sleeve adapter for use with 18650 batteries (max output 75w)
- -Includes Brillipower IMR 26650 3500mAh 60A
Specifications:
- -Cell Type: Single High-Discharge 26650 (above 35A)
- -Will read kanthal, nickel, titanium, or stainless steel wire
- -Output Wattage: 1-100w
- -Resistance Range: 0.05-1.5ohm for TC modes – 0.1-3.5ohm for VW/ Bypass mode
- -Temperature Range: 100-315C/ 200-600F (TC modes)
- -Stealth Function
- -Resistance Lock Function
- -Wattage Lock Function
- -Left/Right Screen Mode
- -Temperature Protection
- -Weak Battery Alert
- -Short Circuit Protection
- -Temperature Alert: If the internal temperature of the device is over 70C, the output will shut off automatically and the screen will display, “Device too hot.”
Please note we recommend only using the following batteries:
- -Brillipower IMR 26650 3500mAh 60A
- -Brillipower IMR 26650 4500mAh Max 80A
- -MXJO 26650 3500mAh 35A
- Shipping Weight: 1.25lbs
THE CALIX V2 ELEGANCE RTA (AND VARIATIONS) BY LEO & NEW CONTEST!
A PBusardo Review The Calix V2 RTA By Leo
In this video we take a look at the Calix V2 and some of it’s different variations. We also kick off a new contest.
The Links:
By Leo Website
Hohmtech
Vaporesso
The Video:
*NOTE: Any use of this video in part or in it’s entirety without Phil Busardo’s expressed written consent is strictly prohibited.
The Photos:
HERE’S SOME MORE INFO ON THE NEW INNOKIN BOARD AND DEVICE
Here’s some more information for you on Innokin’s new board and device. From Innokin:
The CoolFireIV TC100 Temperature Control Vaping System mod is available soon for order from Innokin !
The CoolFireIV TC100 is powered by the Ultra-fast advanced AETHON chipset with 100W of pure power with ClearWave noise cancellation technology.
The CoolFireIV TC100 uses the Variable Temperature Control system with 100W output which includes Titanium, Nickel200, and Stainless Steel in TC Mode.Real long lasting internal 3300mAh battery, the CoolFireIV TC100 is designed to be one of the top-of-the-line compact all day vapes.
Curved to fit perfectly into your hand, with an ergonomically placed power button, the CoolFireIV TC100 is a true pleasure to vape.
Compact, powerful, durable, beautiful and much more, the CoolFireIV TC100 sets the new standard in vaping excellence.
The CoolFireIV TC100 is able to utilize Fast 2Amp Charging and features a greater range of Temperature Control & Variable Wattage, advanced safety protections and ‘Vape while charging’ Technology.
The CoolFireIV TC100 has a flush 510 connection with a spring loaded gold-plated positive pin and durable stainless steel threading.
Operated via three durable buttons with a large, bright OLED screen on the base, the CoolFireIV TC100 is easy to use, stylish and powerful.
- Complete range of T.C. Modes (SS, Ni200, Ti).
- Total T.C. Dry Hit Prevention & Quick Calibration.
- UltraFast response: .2 seconds from Click to Vapor!
- VDC power output with ClearWave noise cancellation.
- Precise Coil Resistance Reading (.00000).
- Uniform coil heating eliminates hotspots.
- 25 – 100W Temperature Control RampUp preBoost.
- High quality stainless steel 510 threading.
- Spring loaded gold plated connector pin.
- 2AMP microUSB Quick Charge.
- Integrated charging safety protections.
- Ultra-low standby power consumption.
INNOKIN ANNOUNCES THE AETHON CHIPSET
From Innokin:
Innokin’s advanced engineering team is proud to introduce the new AETHON Temperature Control Board.
Powerful, Extremely accurate, Ultra-fast and energy efficient.
This new system for total temperature control is powering our next, greatest vaporizer which will soon be sold at your favorite vape shop!
As I get more information I’ll post it up for you.
THE KANGER DRIPBOX & LAST CONTEST WINNER!
A PBusardo Review – The Kanger DripBox & The Last Contest Winner
In this video we mention some up and coming events, briefly talk about the VapeNorthEast event, review the Kanger DripBox, and find out who won the last contest.
The Links:
VapeJam UK
Queen ECigs – Greece
VapeNorthEast
Diablomods
Wapari Design Facebook
Kangertech
The Video:
*NOTE: Any use of this video in part or in it’s entirety without Phil Busardo’s expressed written consent is strictly prohibited.
The Photos:
NEW IN THE QUEUE – THE LOTUS JELLYSLICE – 3/24/16
Well, it’s no big secret that me and the Lotus Jellyfish didn’t exactly get along. Happily the company did not hold a grudge (nor should they ever… it’s nothing personal) and wanted me to look at their new device, the Lotus JellySlice.
Kinda happy about that too because I’m really digging the form factor of this device. It’s slim, very slim. Although the top tapers into a centered 22mm atomizer platform, the device itself is only 15mm thick, making it extremely pocket friendly. Feels pretty solid too. It’s going for $89.99 on the Lotus website. The board running it is a proprietary Lotus board.
Here’s some additional specifications and photos for you as well.
Lotus JellySlice 80W TC Box Mod Features:
2600mAh Internal Polymer Battery
Wattage Ouput Range: 1~80W
Max Voltage Output: 8V
Min Atomizer Resistance: 0.05ohm
Temperature Control Functionality
Ni200 Nickel Compatible
Anodized 6061 Aluminum Shell Construction
Intuitive LCD Display
Three Button Operations
Over Charge Protection
Over Discharge Protection
Short Circuit Protection
Over Fire Protection
510 Connection PinIncludes:
1 JellySlice 80W TC Box Mod
1 Silicone Sleeve
1 MicroUSB Charging Cable
1 Wall Adapter
Instruction Manual
CHINA VISIT 2, VIDEO 3 – VISIT TO A BATTERY FACTORY
A PBusardo Video – A Visit To The Yongdeli Battery Factory
In this video we travel back to China to see how batteries are made as we tour the Shenzhen Yongdeli New Energy battery factory.
Here’s something REALLY interesting that I found out AFTER the video was completed.
Although the general manufacturing process you will see is accurate, the required staff to ensure quality and to properly test the cells was not on hand. Due to this, Tony could not ensure the quality of the cells. So ALL of the batteries you see being manufactured in this video were destroyed and recycled.
Impressive if you ask me.
I sincerely appreciate the effort put forth by Tony and Brian allowing me to show you the manufacturing process.
Whether or not these cells have the specs as advertised, I’ll leave that one to Battery Mooch! 🙂
I hope you enjoy it!
The Links:
Aspire
Brian’s email address: bighorsevan@sbcglobal.net
Boomer Vape
Shenzhen Yongdeli New Energy
The Video:
*NOTE: Any use of this video in part or in it’s entirety without Phil Busardo’s expressed written consent is strictly prohibited.
The Photos:
Store
