Author: pbusardo
From Chris
Hey Phil, great Youtube channel, very informative. I’ve been vaping for a
good year now, and I first started with an ego setup, now I’m using a Nautilus and
an MVP2.0, making my own juice from Mt Baker Vapor and some Capellas. I wanted to
thank you for your efforts in the community and your spread of positive information.
It allowed me extra help in quitting cigarettes, and in a way, it’s like you are
personally supporting me to be healthier.Thank you so much for your contributions to the community. If it helped me, it’s had
to help a whole lot of other people, too.
THE VAPIN’ DONUTS AND MORE!
A PBusardo Review – Vapin’ Donuts
Ok, there’s a lot more in this video other than the Vapin’ Donuts.
We’re going to take a quick look at the Aspire Mini Nautilus and the new head and I’ll give my take on side by side vaping this next to the Kanger Aero Tank Mega.
We’ll take a quick look at a new RDA, the CLT from Infinite, a Chinese manufacturer and put a dual coil build in it.
Then I take a look at the Vapin’ Donuts. I give you my take on these, do a couple builds, and compare them to a comparable Kanthal coil.
We also announce the winner of the last contest and kick off a new one!
The Links:
AspirECig
The CLT RDA
Fat Daddy Vapes
The Video:
The Photos:
From Brian
I’ve smoked since my early twenties, and my girlfriend has smoked since she
was 14. We were able to quit for some time, until super-stressful events had us
backslide right back into it. We tried the disposable ecigs but hated the taste,
and it wouldn’t be long before we went back to the analogs. When I discovered the
wealth of information you had to offer here on this site two months ago, I took the
plunge and purchased a real PV and clearomizer. Neither of us has smoked since,
although we did upgrade to Kayfuns, and now we’re down to 6mg juice! I was only
able to figure out what we needed thanks to the very informative, technical, and
accessible review work that you do on this site.I try my best to pay it forward. I’ve converted a few of my smoking buddies to
vaping setups based on their needs. But, again, I couldn’t have been such a
valuable resource to them without the hours of information I gathered via your
content.Thank you, Phil. You’ve made a real difference in our lives.
CLOUD CHASING
THE EXPROMIZER!
A PBusardo Review – The eXpromizer
In this video we take a look at the eXpromizer, talk about my likes and dislikes, do a build on it, and put a concern I have to rest. Enjoy!
Thanks to Stephanie Roberts for getting me this for review!
The Links:
eXvape
Liberty Vapor
The Video:
The Photos:
THE MORE THINGS CHANGE, THE MORE THEY STAY THE SAME…
After years of innovation and millions in research, Aspire has managed to create…
A CARTO TANK!
HA! I took a look at the new heads that come with the Aspire Nautilus Mini. They are, for all intents and purposes, a vertical coil cartomizer.
I’ve started using them and will be comparing them to the Kanger Aero Tanks with the new head design soon. Performance has been good, but I’m not sold on the flavor and we still have threaded glass.
In the meantime, take a look at the photos below to see what I’m talking about.
G-PLAT UPDATE
As promised, here’s an update to the G-PLAT issue posted earlier…
G-Plat: Public Announcement
To Our Valued Customers,
Through the advice of our attorney, we will not be releasing specific information about our wires.
However, we would like to release the following statements to the most commonly asked questions:• For those who are concerned about the main chemical composition of our wires, our wires do not contain Carbon, Aluminum, Lead, or Copper.
• Vapinology LLC carefully ensures that our wires do not contain amounts of chemicals beyond that which is allowed by The Occupational Safety and Health Administration (“OSHA”).
• Lastly, in response to the Manganese issue, most studies about the harmful effect of Manganese (Mn) are related with various manufacturing processes, such as welding, grinding, brazing, etc. In those manufacturing processes, the temperature of the metal/work-piece is close to (if not exceed) the melting point of manganese. Note that the melting point of manganese is 1246 Celcius (2275 F). Keep in mind that the actual Mn content will vary from heat to heat, but will remain much lower than the permissible upper limit value allowed by the standard/specification.
According to the reactivity data of our wires, even if Mn is released, the amount released will be lower than 1% of the permissible upper limit.We hope that the information that we have provided has given you the confidence to continue using our product.
Thank you for the support that many of you have shown us through this ordeal. For that, we are releasing our highly anticipated 20g HAYWIRE today!!! For all wholesale and retail orders, please visit our website atwww.vapinology.com
Regards,
G-Plat Team
A LITTLE ON THE VCCNE EVENT AND A NEW CONTEST!!
A PBusardo Video & Contest – VCCNE
In this video we take a look at some of the sights and sounds of VCCNE.
We kick it off with the lost VaperShark interview 🙂 and end it up with a contest! Hurry, entires must be in today!
The Links:
VaporShark
Vaping Convention Circuit
Giant Vapes
New England Vaping Company
Avid Vaper
Innokin
The Video:
The Photos:
MEET THE MILITIA!
A PBusardo Video – Meet The Militia
In this video we meet Joe from the Vaping Militia, discuss how it got started and what it does, and talk about other groups and organizations that are here to help both vapers AND vendors.
The Links:
The Vaping Militia Website
The Vaping Militia Facebook
CASAA
SFATA
AVA
VISTA
AEMSA
FreeToVape
The Video:
From Daniell
Hello Phil! I want to thank you so much for all that you put on YouTube! You have helped me to learn how to build coils and wick them. I started out six months ago on a kangertech starter kit. I now vape a mech mod and have dropped to .3 in nicotine and plan to go to zero before the summer is out. I was a 2 pack a day smoker of camel menthols for over 20 years. I have never felt better health wise than I do now.