For those of you who have been asking for the new Dani Extreme 2 review, here’s the next best thing… the Pipeline Pro 2 (same guts I believe).
The PIPELINE PRO 2 is a German made high-end mod for use with 18650 batteries and has 5 different modes.Variable Watt, Temperature Control (with various wires possible), Variable Watt with Heat Protection, Variable Watt with Power Boost and Bypass (unregulated, electronic overload protection)We recommend operation with high current carrying IMR and high drain batteries (eg Samsung 25R) with a discharge current of 20 amps (unprotected).
… and all controlled with a single button. FML… Phil has a lot of reading to do. 🙂 At least it’s not an AC device anymore which will make my life a little easier on this review.
FEATURES
- 5 to 40 Watts
- Up to 12V output voltage
- Up to 15A output current
- OLED display
- Temperature controlled vaping (possible with various wires)
- Heat Protection Function*
- Power Boost Function
- Unregulated vaping possible (‘Bypass’ electronic overload protection)
- Battery shutdown voltage adjustable from 2.5V to 3.0V
- Resistance check
- Displays battery voltage under load
- Adjustable brightness display
- Set the length of time the menu is displayed
- Set the standby time
- Personalise click setting from 0-5 to activate device
- Info menu
- Battery capacity measurable
- Atomizer resistance range from 0.05Ω to 5Ω is possible
- Atomizer resistance from 0.2Ω to 3.5Ω (40W)
- Reverse polarity protection
- Abnormal temperature protection
- Serial Number
- 2 year warranty on the electronics
- Design by Thomas Wilms
- Made in Germany by Dicodes
- £ 160.00 = $254
Store
