Guess I called it when I said, in the eVic Supreme video, that perhaps one of the reasons the 510 connector came out was because of hybrid possibilities.
Didn’t take long!
I was handed this prototype by Joyetech USA in Miami. Sure enough, take the 510 connector off of it, and the top ring and 510 connector off of the eVic … a hybrid!
Very clearly based on the Kayfun design with a few small differences. Those differences are going to make filling it a pain in the buttocks as you may HAVE to use the fill hole on the bottom, which will require a screwdriver, something I’m not a fan off. NO TOOLS PLEASE!
Unlike the Kayfun in which the top cap screws onto the rest of the body, this design holds the glass in place by the top cap screwing onto the top of the chimney, so as soon as you remove the top cap, the glass is just sitting on the bottom o-ring with nothing holding it in place. One wrong move… JUICETASTROPHY!
It’s got an interesting build in found in this one and at a surprising .6 ohms One that, if it performs the same way my vertical build did in the Kayfun, I won’t be happy with, but Ill give it a shot.
Check out some photos below…
Store
