A PBusardo Review – The AGA-T(s)
In this set of videos I take a look at the AGA-T and all it’s versions.
The video is geared more towards a rookie (Not a fan of “noob”) than a veteran as I feel the AGAs are a more entry level device.
If you’re interested in taking the leap to a Genesis, you may want to consider the Smoktech RSST as your first one. It is also reasonably priced, but the spring loaded center post capture (as apposed to the 2-nut capture of the AGA-Ts) may be a little easier to work with for a new user.
The first video is the review. I also have a conversation with Greg, AKA Ninja, who was nice enough to help me with a little Genesis experiment. Thank you Greg! All of Greg’s contact information appears below.
In the second video, I take a look at three different methods for building your wick and coil assemblies and share some of my Genesis experiences to date including some of my experience in materials, gauges, meshes, and the difference between building on a wick/coil on a mech vs. a regulated device. Note that these methods can be applied to most Genesis atomizers.
My apologies for the “action” being a little off camera during some of this video. I’m working on a better method to balance my focus on the task at hand AS WELL AS keeping the action on-cam.
Let’s be clear, am I the best at this? No. But I continue to build my Genesis knowledge and share it with you to the best of my ability.
The Links:
My Vapor Store
Kidney Puncher
… and thank you MATT WILLIAMS!!
Greg’s Contact Information:
(he used 400 mesh too by the way – never mentioned in the video)
Facebook: Greg Melito
Facebook: Ninja Mods
http://www.ninjavapes.com
ninjavapes@gmail.com
The Review Video:
IMPORTANT! The Pulse method shown in this video is not exactly the safest method out there. You’re starting off with a damn near short which could be detrimental to your battery and has the potential to lead to venting. A couple tips I’ve heard, 1) Don’t use a fully charged batter, let it drain to around 3.7 volts. 2) You may want to clean or torch your mesh before rolling it to get rid of any harmful contaminants. Use these methods, like any electric cigarette device at your own risk!!
The Assembly and Building Video:
The Photos
Store
