I met the guy behind VapeDroid at the London event. Nice guy.
Here’s his new offering, the VapeDroid C1H2, designed in Germany and manufactured by S-Body in China. This one is going to be similar to the Vape-Forward Stout, but with a magnetic battery door holding a 26650 and no 18650 conversion tube.
It has a nice rubberized grip and is powered by S-Body electronics.
Here’s some additional information for you:
VapeDroid C1H2 is the first true crossover mod from the High-End scene to the mainstream market. It comes after years of development of the VapeDroid concept and designs using cutting edge technologies, German engineering and materials that were 100% unique to the VapeDroid brand, with market testing taking place in the highly critical high-end scene. All of this has been distilled into this latest product which embodies the design principles that made VapeDroid so beloved by its customer base, and is finally provided at an affordable price point thanks to my partners at S-Body who have worked with me to bring the price right down without compromising on design principles or quality of the end product. Previous mods which I made by hand sold at RRP’s up to €500, whereas this mod is under the $100 price point.
VapeDroid C1H2 is unique in being the only ‘singular design’ mod available. This means that every single component was designed as a proprietary part for this mod alone, including the chip whose board design and layout were developed specifically in tandem with the design specifications of the mod. As a modder who takes great pride in his work, I knew that attention to every detail would be the key to making my mod stand out, and I believe I’ve achieved that with the C1H2. Whereas previous mods were slightly compromised due to the need to design around 3rd party chips (evolv and YiHi), as well as other 3rd party components, this mod was made with zero compromises, ensuring a mod that lives up to its brief, with maximum efficiency in its use of space providing a class-leading mod in terms of compactness, ergonomics and usability.
If I could describe the VapeDroid design concept in one word, it would be UTILITARIAN. As a big fan of Star Wars, I set out to make a series of mods good enough for a Jedi… mods that are made to be used, not pampered. (Side note: Out of respect for Lucasfilm intellectual property, I will never use Star Wars related characters or other intellectual property, unlike other mods out there. Every element of the VapeDroid brand was designed from a blank sheet of paper and is 100% original)
In response to several difficulties that came up over the past few years using Evolv and YiHi chipsets, I decided to work in partnership to commission an original chipset for this mod. The HyperDrive chipset was designed to be reliable and accurate, with a simple and easy to navigate interface. Whilst lacking in advanced features such as upgradeable firmware, it makes up for it by increased reliability due to its simplicity, as well as covering the basics in terms of smooth power delivery and support for temperature control.
Details:
- Body: Zinc Alloy
- 510: Stainless Steel
- 510 Pin: Copper
- 510 Pin Threading: PEEK
- Switches: Stainless Steel
- Finish: Soft-touch rubberised finish
HyperDrive chipset:
- Cell Type Supported: High-rate 26650 cell with a minimum discharging current of 25A.
- Output Modes: Power (VW) / TC Ni / TC Ti / TC SS
- Output Wattage: 5-75W (in 0.1W increments)
- Resistance Range:
- Kanthal – 0.05-4 (0.1-0.6 full power, otherwise max 7.1V)
- Ni200 – 0.05-0.35
- Titanium – 0.1-0.8
- SS316 – 0.2-0.75
- Temperature Range: 100-300°C / 210-570°
Here are some photos for you…
Store
